Mine too is labelled as NTSC. Interestingly enough there are a set of
resistors that look as though they might indicate the version of the
FlyVideo card. You can find these resistors in a row, just above the
SAA7130/4 chip.
The nine positions are labelled GP1 .. GP9
I have 4.7k resistors (marked 472) in positions 1,3,5,8,9.
These resistors appear to be connected to part of the GPIO port on the
SAA713x chip and so should be readable by the driver. Maybe if other
people could report on their settings, we could make the driver smart
enough to select the correct tuner (for the FV2k at least)
Philip
Shaun Jackman wrote:
Yes, on the side of the box there's the equivalent of a paper-based
radio button, with TV Standard: NTSC(USA) selected, and Options:
Remote Control selected. The name of the product is the LifeView
FlyVIDEO2000. Can the tuner be changed on the fly? If so, that can be
selected by v4lctl. I don't mind setting the tuner type on boot up.
I'm not even sure the audio_clock change is necessary. I'll test
that. It's only in there because that's the value the Windows driver
was using (slurped with a PCI peek). The GPIO value is actually what
I think made the difference to my audio. Any idea why?
Cheers,
Shaun
On Thu March 27, 2003 00h34, you wrote:
Shaun Jackman <sjackman@xxxxxxx> writes:
- .audio_clock = 0x00200000,
- .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .audio_clock = 0x00187de7, // sdj
+ .tuner_type = TUNER_LG_NTSC_NEW_TAPC, // sdj
That will surely break for other users. Looks like there are
different pieces of hardware with the same label printed on it.
Either different revisions of the card or they sell different cards
in different countries (probably depending on the tv norm used).
We need more than one entry for the flyvideo 2000 I guess.
As you mention NTSC in the subject: Is your card explicitly
labeled as NTSC version?
