Hi Wieslaw Am Samstag, 15. März 2003 00:52 schrieb Wieslaw Kierbedz <sprawki@xxxxx>: >> i get no sound with my flyvideo 3000. >> I use Kernel 2.4.20 with v4l Pathes from www.bytesex.org, saa7134-0.2.5 > www.bytesex.org/xawtv > you need xawtv >= 3.76 newest is best Ok, now i have xawtv 3.85 but same problem. I think it is a problem with saa7134 driver. Because when i make modprobe saa7134 card=2 i get: Mar 18 21:30:48 flolinux kernel: i2c-core.o: i2c core module Mar 18 21:30:48 flolinux kernel: Linux video capture interface: v1.00 Mar 18 21:30:48 flolinux kernel: saa7130/34: v4l2 driver version 0.2.4 loaded Mar 18 21:30:48 flolinux kernel: PCI: Found IRQ 11 for device 02:01.0 Mar 18 21:30:48 flolinux kernel: PCI: Sharing IRQ 11 with 00:1f.3 Mar 18 21:30:48 flolinux kernel: saa7134[0]: found at 02:01.0, rev: 1, irq: 11, latency: 32, mmio: 0xeb003000 Mar 18 21:30:48 flolinux kernel: saa7134[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 [card=2,insmod option] Mar 18 21:30:48 flolinux kernel: i2c-core.o: adapter saa7134[0] registered as adapter 0. Mar 18 21:30:48 flolinux kernel: saa7134[0]: Huh, no eeprom present (err=-5)? Mar 18 21:30:48 flolinux kernel: i2c-core.o: driver i2c TV tuner driver registered. Mar 18 21:30:48 flolinux kernel: tuner: probing saa7134[0] i2c adapter [id=0x90000] Mar 18 21:30:48 flolinux kernel: tuner: chip found @ 0xc2 Mar 18 21:30:48 flolinux kernel: tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) Mar 18 21:30:48 flolinux kernel: i2c-core.o: client [Philips PAL_BG (FI1216 and compa] registered to adapter [saa7134[0]](pos. 0). Mar 18 21:30:48 flolinux kernel: saa7134[0]: registered device video0 [v4l2] Mar 18 21:30:48 flolinux kernel: saa7134[0]: registered device vbi0 Mar 18 21:30:48 flolinux kernel: saa7134[0]: registered device radio0 Mar 18 21:30:50 flolinux kernel: saa7134[0]/audio: oops: audio carrier scan failed and last line says there is an audio problem. Can anyone help me? Thx Flo