Hi again,
here is the output to syslog when starting zapping as v4l client:
Mar 2 23:21:43 Baden kernel: i2c-core.o: i2c core module
Mar 2 23:21:43 Baden kernel: i2c-algo-bit.o: i2c bit algorithm module
Mar 2 23:21:43 Baden kernel: Linux video capture interface: v1.00
Mar 2 23:21:43 Baden kernel: bttv: driver version 0.7.96 loaded
Mar 2 23:21:43 Baden kernel: bttv: using 4 buffers with 2080k (8320k
total) for capture
Mar 2 23:21:43 Baden kernel: bttv: Host bridge is VIA Technologies,
Inc. VT82C598 [Apollo MVP3]
Mar 2 23:21:43 Baden kernel: bttv: Host bridge is VIA Technologies,
Inc. VT82C586B ACPI
Mar 2 23:21:43 Baden kernel: bttv: Bt8xx card found (0).
Mar 2 23:21:43 Baden kernel: PCI: Found IRQ 12 for device 00:13.0
Mar 2 23:21:43 Baden kernel: bttv0: Bt848 (rev 18) at 00:13.0, irq: 12,
latency: 64, mmio: 0xe9001000
Mar 2 23:21:43 Baden kernel: bttv0: using: BT848A( *** UNKNOWN/GENERIC
**) [card=0,autodetected]
Mar 2 23:21:43 Baden kernel: i2c-core.o: adapter bt848 #0 registered as
adapter 0.
Mar 2 23:21:43 Baden kernel: bttv0: using tuner=-1
Mar 2 23:21:43 Baden kernel: bttv0: i2c: checking for MSP34xx @ 0x80...
found
Mar 2 23:21:43 Baden kernel: i2c-core.o: driver i2c msp3400 driver
registered.
Mar 2 23:21:43 Baden kernel: msp34xx: init: chip=MSP3400C-C6
Mar 2 23:21:43 Baden kernel: msp3400: daemon started
Mar 2 23:21:43 Baden kernel: bttv0: i2c attach [client=MSP3400C-C6,ok]
Mar 2 23:21:43 Baden kernel: i2c-core.o: client [MSP3400C-C6]
registered to adapter [bt848 #0](pos. 0).
Mar 2 23:21:43 Baden kernel: bttv0: i2c: checking for TDA9875 @ 0xb0...
not found
Mar 2 23:21:43 Baden kernel: bttv0: i2c: checking for TDA7432 @ 0x8a...
not found
Mar 2 23:21:44 Baden kernel: i2c-core.o: driver i2c TV tuner driver
registered.
Mar 2 23:21:44 Baden kernel: tuner: probing bt848 #0 i2c adapter
[id=0x10005]
Mar 2 23:21:44 Baden kernel: tuner: chip found @ 0xc2
Mar 2 23:21:44 Baden kernel: bttv0: i2c attach [client=Philips PAL_BG
(FI1216 and compa,ok]
Mar 2 23:21:44 Baden kernel: i2c-core.o: client [Philips PAL_BG (FI1216
and compa] registered to adapter [bt848 #0](pos. 1).
Mar 2 23:21:44 Baden kernel: bttv0: registered device video0
Mar 2 23:21:44 Baden kernel: bttv0: registered device vbi0
Still no sound even if volume is set to maximum. SPeakers are connected
directly to the TV card. I can't see any errors in the log file? Even
the right sound chip was found.
r@xxx