Hi! I tried to set up the following tuner Card: PixelviewPlayTV Pro Rev. 2F (+FM Radio, Remote controller, bt878) The string written on the tuner module is : TPI8PSB02P Howewer, i have not found this in the "Tuners" file. I think it is "TPI8PSB12 Pal D/K+B/G (TPI8PSB02 w/FW) (P,170,450)", but this (TPI8PSB12) is not listed in the CARDLIST file. Of course, i tried to use all LG Innotek tuner types (25-29) at the tuner module (insmod), but every time i get with xawtv: - Acceptable picture at full screen overlay mode; - At full screen grabdisplay mode, there are small dots on the right part (~1/3) on the screen; - Every time very noisy and poor sounds Does anyone have an idea, how should i set up this card to work correctly? Thanks for all tips, Tat *** There are all parameters i used: at modules.conf: #i2c alias char-major-89 i2c-dev options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=1 #bttv alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=37 radio=1 options tuner type=28 debug=1 The system specs: kernel 2.4.17 with bttv 0.7.83 (btaudio kernel module installed) debian GNU Linux 3.0 AMD K6-2 450MHz VIA MVP3 chipset nvidia GF2 M64 32MB SB16 Sound Card and the messages at startup (cutted from /var/log/messages): ******************** i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module i2c-core.o: driver i2c tda9875 driver registered. i2c-core.o: driver i2c tda7432 driver registered. i2c-core.o: driver i2c msp3400 driver registered. bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT82C597 [Apollo VP3] bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0a.0 IRQ routing conflict for 00:0a.0, have irq 9, want irq 11 IRQ routing conflict for 00:0a.1, have irq 9, want irq 11 bttv0: Bt878 (rev 2) at 00:0a.0, irq: 9, latency: 64, memory: 0xe6001000 bttv0: using: BT878(PixelView PlayTV pro) [card=37,insmod option] i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c-algo-bit.o:1 scl: 1 sda: 0 i2c-algo-bit.o:2 scl: 1 sda: 1 i2c-algo-bit.o:3 scl: 0 sda: 1 i2c-algo-bit.o:4 scl: 1 sda: 1 i2c-algo-bit.o: bt848 #0 passed test. i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0xc2 bttv0: i2c attach [client=LG PAL_BG+FM (TPI8PSB01D),ok] i2c-core.o: client [LG PAL_BG+FM (TPI8PSB01D)] registered to adapter [bt848 #0](pos. 0). tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. btaudio: driver version 0.6 loaded [analog+digital] PCI: Found IRQ 11 for device 00:0a.1 IRQ routing conflict for 00:0a.0, have irq 9, want irq 11 IRQ routing conflict for 00:0a.1, have irq 9, want irq 11 btaudio: Bt878 (rev 2) at 00:0a.1, irq: 9, latency: 64, memory: 0xe6002000 *********************
