Re: Pinnacle PCTVpro problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



shree_radhe wrote:

HI,

I had the same problem when i had Windows on my pc. Goto www.bytesex.org and read the FAQ on bttv, there u will find the answer.

But since now i have only Linux i am having troubles tuning to any stations.


n'way u can try that solution out.
Regards,
Madhav
video4linux-list@xxxxxxxxxx wrote:
Il dom, 2003-02-23 alle 13:16, Medve Zoltán ha scritto:
Hi

I have a problem with my PCTVpro board. I can tune stations, but I have
picture and sound. I use 2.4.20 kernel. What should I do? Please help.


I have the same problem.

If I reboot from windows I can see just the last channel that I saw in
windows and I cannot tune any other station. If I boot directly from
Linux i see nothing.


Hm, I have a PCTVpro board (PAL), vanilla kernel 2.4.20 and xawtv 3.72 (on a Debian/testing release) and everything's fine. Also I had no problems with kernel 2.4.18 and the current stable Debian release, or with the old potato release I used last year. Here is what my dmesg says:

Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is PCI device 1039:0648 (Silicon Integrated Systems [SiS])
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0a.0, irq: 10, latency: 32, mmio: 0xee800000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: miro: id=16 tuner=1 radio=fmtuner stereo=yes
bttv0: using tuner=1
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3450G-B8, has NICAM support
msp3410: daemon started
bttv0: i2c attach [client=MSP3450G-B8,ok]
i2c-core.o: client [MSP3450G-B8] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
bttv0: i2c attach [client=Philips PAL_I (FI1246 and compat,ok]
i2c-core.o: client [Philips PAL_I (FI1246 and compat] registered to adapter [bt848 #0](pos. 1).
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 ... ok

gc






[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux