>I have an ATI TV wonder card (regular, not value) that works fine except >for one problem -- the picture does not quite fill the width of the >window when running Xawtv or Zapping. Vertically, the picture fits fine. >But horizontally, about 5% of the left side and 3% of the right side are >black. Also, the picture looks slightly squeezed when compared to >running under Windows. I see the same problem when running full screen >or not full screen and even when starting xawtv with -noxv. I have tried >versions 0.96, 0.7.105 and 0.7.100 of the bttv driver and see no >difference. I have verified that the various bttv versions do load from >the kernel logs. I am running kernel 2.4.20 on an i815 motherboard. I am >in the US and am using NTSC. I have tried various tuner configurations >via insmod with no luck. I suspect that there is some width calculation >that is slightly off for NTSC. If someone could give me some good ideas >of where to fiddle in the source, I can try to fix it on my end. Both NTSC and PAL do not fill the captured line. For examples, take a look at the uncropped images during the lower part of the following page: http://vidiot.com/SatSlates.html In other words, there is nothing wrong. MB -- e-mail: vidiot@xxxxxxxxxx /~\ The ASCII [I'm just the one who beat him off... Repelled him] \ / Ribbon Campaign [would perhaps be the better phrase. Spike 2/18/03] X Against Visit - URL: http://vidiot.com/ / \ HTML Email