Have you checked this out? http://www.lavrsen.dk/sources/webcam/motion_guide.htm --Charlie -----Original Message----- From: video4linux-list-admin@xxxxxxxxxx [mailto:video4linux-list-admin@xxxxxxxxxx]On Behalf Of Daniel Moone Sent: Friday, February 07, 2003 8:49 PM To: video4linux-list@xxxxxxxxxx Subject: xawtv-3.84 where's xawtv? Take it easy on me I'm pretty new to this stuff! I want to get the point where I can setup motion well, and think I should start with xawtv. If you know of a better forum for my question let me know, I couldn't find it. I installed xawtv-3.84 and afterwards I don't have the xawtv command. Any ideas how to get it or what's wrong? I do get /usr/local/bin/webcam, streamer, record, radio... etc, but no xawtv. It's not on my system - it doesn't turn up with find or locate. streamer works with composite, albeit vert or horiz hold is a little messed up with a black line across the middle. So I think driver and dependencies are OK. I can reply post the configure make and make install output if it helps. Also tried to build as rpm and did rpm -i That completed but still no xawtv command. Originally, I had xawtv-3.74 which was the newest RH8 xawtv rpm at rpmfind.net and that worked but the tuner didn't. I had dual boot to win98 to change channels. So I thought I'd try 3.84. Now, no xawtv :( I think it's a software issue, probably my ignorance with installing, but here's some system info nonetheless: system: RH8 2.4.18-19.8.0 #1 Thu Dec 12 04:35:52 EST 2002 i586 i586 i386 GNU/Linux tv card: Kworld BT878 TV Capture Card KW-TV878RF dmesg: i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v1.00 bttv: driver version 0.7.91 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT82C598 [Apollo MVP3] bttv: Host bridge is VIA Technologies, Inc. VT82C596 Power Management bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:11.0 PCI: Sharing IRQ 11 with 00:11.1 bttv0: Bt878 (rev 17) at 00:11.0, irq: 11, latency: 32, memory: 0xe1102000 bttv0: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 bttv0: i2c attach [client=(unset),ok] i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 0). bttv0: registered device video0 bttv0: registered device vbi0
