On Sunday 10 November 2002 11:29, Philip Dodd wrote: > Basically, the message was to say I'd fixed the problems, and to > apologise to you all. It was the patch - as you correctly pointed out, > I don't think it contained the necessary tuner patches to enable the > tda9887 support required for the mt2032 tuner. It's up and running > using the patches from bytesex.org (slaps head for not trying them > earlier), the tuner is picked up, the tda9887 is enabled and all is > well. Now running 2.4.20-rc1 with the i2c, bttv and tuner patches from > bytesex.org. I'm facing similar problems with a Pinnacle PCTV. I have a tda9885 tuner, and I load the 0.7.100 bttv kernel drivers on a 2.4.19 kernel with: insmod tuner type=33 insmod bttv card=39 and the image is crisp, but with no sound at all. (if I fine tune on xawtv, I can get sound, but then the image deteriorates) I've tried those patches on a 2.4.20-rc1 kernel, but it didn't help. Here is dmesg output: ------ i2c-core.o: driver i2c TV tuner driver registered. tuner: ignoring SMBus Via Pro adapter at e800 i2c adapter [id=0x40002] tuner: ignoring ISA main adapter i2c adapter [id=0x50000] Linux video capture interface: v1.00 bttv: driver version 0.7.100 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller bttv: Bt8xx card found (0). PCI: Found IRQ 5 for device 00:0a.0 PCI: Sharing IRQ 5 with 00:0a.1 bttv0: Bt878 (rev 17) at 00:0a.0, irq: 5, latency: 32, mmio: 0xe6800000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,insmod option] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 bttv0: i2c attach [client=MT2032 universal,ok] i2c-core.o: client [MT2032 universal] registered to adapter [bt848 #0](pos. 0). MT2032: Companycode=4d54 Part=04 Revision=04 i2c-core.o: adapter bt848 #0 registered as adapter 2. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=5 info="NTSC / mono" radio=no tuner: type already set bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. bttv0: PLL: 28636363 => 35468950 ... ok bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: switching off bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off -- Ricardo Niederberger Cabral <nieder@xxxxxxx>
