RE: Sensoray 311 — Video for Linux

Your jumper settings for the board probably is not quite right. I'll find out the note and mail it to you personally.

Charlie

-----Original Message-----
From: video4linux-list-admin@xxxxxxxxxx [mailto:video4linux-list-admin@xxxxxxxxxx]On Behalf Of Richard Caldwell
Sent: Thursday, November 07, 2002 4:18 AM
To: video4linux-list@xxxxxxxxxx
Subject: RE: Sensoray 311

Should these settings in /etc/modules.conf be the same for PAL. I’m now capturing images OK in NTSC since I made those changes but PAL is still creating completely corrupted images.

The output from the app. Is exactly as you said it should be now. Also, after the lines…………………

            vm.offsets[0]=0x00000000

                        vm.offsets[1]=0x00208000

the app. Appears to pause for up to 1 or 2 minutes before completing execution??? Any idea why? Sometimes the pause is quite short and sometimes it is very long.

R.C.

-----Original Message-----
From: video4linux-list-admin@xxxxxxxxxx [mailto:video4linux-list-admin@xxxxxxxxxx] On Behalf Of Charlie Liu
Sent: 06 November 2002 19:03
To: video4linux-list@xxxxxxxxxx
Subject: RE: Sensoray 311

Have you made setup change in /etc/modules.conf right? It should like following:

                        alias char-major-89 i2c-dev

                        options i2c-core i2c_debug=1

                        options i2c-algo-bit bit_test=1

                        alias char-major-81 bttv

                        alias char-major-81-0 bttv

                        options bttv card=73 radio=1

                        options tuner debug=1 type=4

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.408 / Virus Database: 230 - Release Date: 24/10/2002