Hi,
Thanks for the patches. With those applied, stuff seems to work quite
good. I'm still having troubles with teletext. Anyone have a clue?
The second problem I'm now having, is that I can't get the radio to work
until I have first started and closed xawtv. When I start radio (or
gradio) right after boot, I only get noise, no matter what frequency I
use). After I have used xawtv once, everything is perfect.
But sometimes when I change tv-channel using xawtv I only get the same
noise (as with a un-tuned radio) as audio. If I change to another
channel, I usually get the right audio. Or sometimes I have to change
channels a couple of times. Anyone have an idea about this? This is the
only thing that really bugs me.
Thanks for your help so far :)
Best regards,
Stian Jordet
ons, 2002-11-06 kl. 19:10 skrev Gunther Mayer:
> And apply this on top to get autodetected:
>
> --- saa7134-cards.c-orig Wed Nov 6 19:06:23 2002
> +++ saa7134-cards.c Wed Nov 6 19:06:26 2002
> @@ -320,6 +320,13 @@
> subdevice: 0x1142,
> driver_data: SAA7134_BOARD_CINERGY400,
> },{
> + vendor: PCI_VENDOR_ID_PHILIPS,
> + device: PCI_DEVICE_ID_PHILIPS_SAA7134,
> + subvendor: 0x153B,
> + subdevice: 0x1143,
> + driver_data: SAA7134_BOARD_CINERGY600,
> + },{
> +
>
> /* --- boards without eeprom + subsystem ID --- */
> vendor: PCI_VENDOR_ID_PHILIPS,
>
>
> Thomas Pundt wrote:
> >
> > Hi,
> >
> > On 05-Nov-2002 Stian Jordet wrote:
> > | I have e Terratec Cinergy 600 which works quite fine with the SAA7134
> > | driver. I'm using the CARD=8 when I modprobe it, and it works quite
> > | well, I think.
> > |
> > | I have to-three small problems/questions. This card also have onboard
> > | radio, which (ofcourse) does not work. Will there be done some work on
> > | that?
> >
> > the following patch works for me; at least under 2.5.46 I can now
> > also listen to the radio.
> >
> > diff -ur saa7134-0.2.1.orig/saa7134-cards.c saa7134-0.2.1/saa7134-cards.c
> > --- saa7134-0.2.1.orig/saa7134-cards.c Thu Aug 22 11:23:06 2002
> > +++ saa7134-0.2.1/saa7134-cards.c Wed Nov 6 09:02:11 2002
> > @@ -288,6 +288,34 @@
> > amux: LINE2,
> > },
> > },
> > + [SAA7134_BOARD_CINERGY600] = {
> > + name: "Terratec Cinergy 600 TV",
> > + audio_clock: 0x00200000,
> > + tuner_type: TUNER_PHILIPS_PAL,
> > + inputs: {{
> > + name: name_tv,
> > + vmux: 1,
> > + amux: TV,
> > + tv: 1,
> > + },{
> > + name: name_comp1,
> > + vmux: 4,
> > + amux: LINE1,
> > + },{
> > + name: name_svideo,
> > + vmux: 8,
> > + amux: LINE1,
> > + },{
> > + name: name_comp2, // CVideo over SVideo Connector
> > + vmux: 0,
> > + amux: LINE1,
> > + }},
> > + radio: {
> > + name: name_radio,
> > + amux: LINE2,
> > + },
> > +
> > + },
> > };
> > const int saa7134_bcount = (sizeof(saa7134_boards)/sizeof(struct
> > saa7134_board));
> >
> > diff -ur saa7134-0.2.1.orig/saa7134.h saa7134-0.2.1/saa7134.h
> > --- saa7134-0.2.1.orig/saa7134.h Fri Oct 25 18:31:55 2002
> > +++ saa7134-0.2.1/saa7134.h Wed Nov 6 09:01:13 2002
> > @@ -126,6 +126,7 @@
> > #define SAA7134_BOARD_TVSTATION_RDS 7
> > #define SAA7134_BOARD_CINERGY400 8
> > #define SAA7134_BOARD_MD5044 9
> > +#define SAA7134_BOARD_CINERGY600 10
> >
> > #define SAA7134_INPUT_MAX 8
> >
> >
> > --
> > Thomas Pundt -------------------------- http://www.pundt.de/ -----------------
> > EMail: Thomas Pundt <thomas@xxxxxxxx> | Schlossstrasse 42, D-40477 Duesseldorf
> >
> > --
> > video4linux-list mailing list
> > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
> > https://listman.redhat.com/mailman/listinfo/video4linux-list
>
>
>
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
> https://listman.redhat.com/mailman/listinfo/video4linux-list
