Hello,
I have e Terratec Cinergy 600 which works quite fine with the SAA7134
driver. I'm using the CARD=8 when I modprobe it, and it works quite
well, I think.
I have to-three small problems/questions. This card also have onboard
radio, which (ofcourse) does not work. Will there be done some work on
that?
The second is I can't seem to get the teletext to work with alevt. Is
that supposed to work?
Then I have a little weird problem. I'm using Debian Sid, kernel
2.4.20-rc1, and when I modprobe the saa7134 manually, everything works
fine, but when i list it in /etc/modules (which autoloads the module at
boot), I get an oops. Part of dmesg below. It doesn't really matter, as
it works perfect.
Thanks for great work! I saw that this driver has been included with
2.5.46, which is great, but are there plans for v4l2 and saa7134 for the
2.4 series?
Best regards,
Stian Jordet
saa7130/34: v4l2 driver version 0.2.1 loaded
saa7134[0]: found at 00:0c.0, rev: 1, irq: 19, latency: 32, mmio:
0xdc000000
saa7134[0]: subsystem: 153b:1143, board: Terratec Cinergy 400 TV
[card=8,insmod
option]
Unable to handle kernel NULL pointer dereference at virtual address
00000008
i2c-dev.o: Registered 'saa7134[0]' as minor 0
i2c-core.o: adapter saa7134[0] registered as adapter 0.
printing eip:
e08a435d
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<e08a435d>] Not tainted
EFLAGS: 00010202
eax: e08ac000 ebx: 00000001 ecx: dfd48000 edx: e08ac0ff
esi: dfd48000 edi: 00000000 ebp: 00000000 esp: df713f9c
ds: 0018 es: 0018 ss: 0018
Process saa7134[0] (pid: 52, stackpage=df713000)
Stack: df712000 dfd48360 dfd48000 df712000 e08a440a dfd48000 e08a4bb8
dfd48000
dfd48000 00000100 df899e5c dfd48000 df899e9c df899e5c dfd48360
df899e9c
00000000 c0110018 c0110018 00000078 c010567b c0105684 dfd48000
00000078
Call Trace: [<e08a440a>] [<e08a4bb8>] [<c0110018>] [<c0110018>]
[<c010567b>]
[<c0105684>]
Code: 8b 47 08 83 f8 02 74 1b 77 09 83 f8 01 74 0b eb 1b 89 f6 83
saa7134[0]/video: DCSDT: no signal
saa7134[0]: i2c eeprom 00: 3b 15 43 11 ff ff ff ff ff ff ff ff ff ff ff
ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7134[0]/video: DCSDT: no signal
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing saa7134[0] i2c adapter [id=0x90000]
tuner: chip found @ 0xc0
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
i2c-core.o: client [Philips PAL_BG (FI1216 and compa] registered to
adapter [saa
7134[0]](pos. 0).
saa7134[0]/video: DCSDT: no signal
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device dsp2
saa7134[0]: registered device mixer1
saa7134[0]/video: DCSDT: found PAL
