You got improper setting there. I'll send a note and sample testing code to you to fix the problem this afternoon after I get my urgent work here done. Charlie X. Liu Tech-Support Sensoray Company 7337 SW Tech Center Dr. Tigard, OR 97223, USA (503) 684-8073 <Charlie@xxxxxxxxxxxx> -----Original Message----- From: video4linux-list-admin@xxxxxxxxxx [mailto:video4linux-list-admin@xxxxxxxxxx]On Behalf Of João Neto Sent: Tuesday, October 29, 2002 8:36 AM To: video4linux-list@xxxxxxxxxx Subject: Sensoray 611 (bt878) - bttv 0.7.91 - Help please! Hi! I just got myself a Sensoray Model 611 frame grabber (bt878) and I'm having trouble making it work under Linux. I'm running Red Hat 8.0 which already has the bttv driver (version 0.7.91) installed as a module. When I plugged the card, it was detected by Red Had and it added the following line to my /etc/modules.conf : alias char-major-81 bttv I tryed to capture some images (using several programs) but I cant get a clear image, all I can see is some vertical and horizontal stripes. I live in Europe, so my cameras are PAL. I've tryed both in PAL (768x576) and NTSC (640x480) with the same results. Ive been looking on the internet, reading online forums, but I can't still make it work. I've tryed the following /etc/modules.conf, but the image is still the same: alias char-major-89 i2c-dev options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=1 alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=0 options bttv pll=1 When I type: modprobe bttv the following log is written to /var/log/messages: Oct 29 23:33:42 localhost kernel: Linux video capture interface: v1.00 Oct 29 23:33:42 localhost kernel: i2c-core.o: i2c core module Oct 29 23:33:42 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module Oct 29 23:33:42 localhost kernel: bttv: driver version 0.7.91 loaded Oct 29 23:33:42 localhost kernel: bttv: using 2 buffers with 2080k (4160k total) for capture Oct 29 23:33:42 localhost kernel: bttv: Host bridge is Silicon Integrated Systems [SiS] 630 Host Oct 29 23:33:42 localhost kernel: bttv: Bt8xx card found (0). Oct 29 23:33:42 localhost kernel: PCI: Found IRQ 12 for device 00:0e.0 Oct 29 23:33:42 localhost kernel: PCI: Sharing IRQ 12 with 00:01.2 Oct 29 23:33:42 localhost kernel: PCI: Sharing IRQ 12 with 00:01.3 Oct 29 23:33:42 localhost kernel: PCI: Sharing IRQ 12 with 00:0e.1 Oct 29 23:33:42 localhost kernel: bttv0: Bt878 (rev 17) at 00:0e.0, irq: 12, latency: 32, memory: 0xef800000 Oct 29 23:33:42 localhost kernel: bttv0: subsystem: 6000:0611 (UNKNOWN) Oct 29 23:33:42 localhost kernel: bttv0: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected] Oct 29 23:33:42 localhost kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... Oct 29 23:33:42 localhost kernel: i2c-algo-bit.o:1 scl: 1 sda: 0 Oct 29 23:33:42 localhost kernel: i2c-algo-bit.o:2 scl: 1 sda: 1 Oct 29 23:33:42 localhost kernel: i2c-algo-bit.o:3 scl: 0 sda: 1 Oct 29 23:33:42 localhost kernel: i2c-algo-bit.o:4 scl: 1 sda: 1 Oct 29 23:33:42 localhost kernel: i2c-algo-bit.o: bt848 #0 passed test. Oct 29 23:33:42 localhost kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. Oct 29 23:33:42 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found Oct 29 23:33:42 localhost kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found Oct 29 23:33:42 localhost kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found Oct 29 23:33:42 localhost kernel: i2c-core.o: driver i2c TV tuner driver registered. Oct 29 23:33:42 localhost kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005] Oct 29 23:33:42 localhost kernel: bttv0: registered device video0 Oct 29 23:33:42 localhost kernel: bttv0: registered device vbi0 Could you please help me getting this board to work? João Neto
