Below is the messages I get when using the latest snapshot (11 oct) of the saa7134 driver, and getting no sound.. Loaded with 'modprobe saa7134 audio_debug=1 card=8'. Note the register dump. -- snip -- Oct 11 18:35:24 flow kernel: saa7134[0]: found at 02:0a.0, rev: 1, irq: 11, latency: 32, mmio: 0xfeaff800 Oct 11 18:35:24 flow kernel: saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy 400 TV [card=8,insmod option] Oct 11 18:35:24 flow kernel: saa7134[0]/audio: ctl_mute=1 automute=0 input=Television => mute=1 input=Television Oct 11 18:35:24 flow kernel: i2c-core.o: adapter saa7134[0] registered as adapter 0. Oct 11 18:35:24 flow kernel: saa7134[0]/audio: tvaudio thread scan start [0] Oct 11 18:35:24 flow kernel: saa7134[0]/video: DCSDT: no signal Oct 11 18:35:24 flow kernel: saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff ff ff ff ff ff ff Oct 11 18:35:24 flow kernel: saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Oct 11 18:35:24 flow kernel: saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Oct 11 18:35:24 flow kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Oct 11 18:35:24 flow kernel: i2c-core.o: driver i2c TV tuner driver registered. Oct 11 18:35:24 flow kernel: tuner: probing saa7134[0] i2c adapter [id=0x90000] Oct 11 18:35:24 flow kernel: tuner: chip found @ 0xc0 Oct 11 18:35:24 flow kernel: tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) Oct 11 18:35:24 flow kernel: i2c-core.o: client [Philips PAL_BG (FI1216 and compa] registered to adapter [saa7134[0]](pos. 0). Oct 11 18:35:24 flow kernel: saa7134[0]/video: DCSDT: no signal Oct 11 18:35:24 flow kernel: saa7134[0]: registered device video0 [v4l2] Oct 11 18:35:24 flow kernel: saa7134[0]: registered device vbi0 Oct 11 18:35:24 flow kernel: saa7134[0]: registered device dsp1 Oct 11 18:35:24 flow kernel: saa7134[0]: registered device mixer1 Oct 11 18:35:24 flow kernel: saa7134[0]/video: DCSDT: no signal Oct 11 18:35:24 flow kernel: saa7134[0]/video: DCSDT: found PAL Oct 11 18:35:24 flow kernel: saa7134[0]/audio: tvaudio thread scan start [1] Oct 11 18:35:25 flow kernel: saa7134[0]/audio: scanning 5.500 MHz => dc is 0 [0/0] Oct 11 18:35:25 flow kernel: saa7134[0]/audio: scanning 6.000 MHz => dc is 0 [0/0] Oct 11 18:35:25 flow kernel: saa7134[0]/audio: scanning 6.500 MHz => dc is 0 [0/0] Oct 11 18:35:25 flow kernel: saa7134[0]/audio: carrier scan failed, using default (5.500 MHz) Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x143 [AUDIO_STATUS ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x145 [IDENT_SIF ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x146 [LEVEL_READOUT1 ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x147 [LEVEL_READOUT2 ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x14a [DCXO_IDENT_CTRL ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x14b [DEMODULATOR ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x14c [AGC_GAIN_SELECT ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x160 [MONITOR_SELECT ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x161 [FM_DEEMPHASIS ]: 0x22 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x162 [FM_DEMATRIX ]: 0x80 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x16d [SIF_SAMPLE_FREQ ]: 0x00 Oct 11 18:35:25 flow kernel: saa7134[0]: reg 0x16e [ANALOG_IO_SELECT]: 0x32 Oct 11 18:35:25 flow kernel: saa7134[0]/audio: tvaudio_setmode: trying PAL-B/G FM-stereo [5.500/5.742 MHz] Oct 11 18:35:26 flow kernel: saa7134[0]/audio: tvaudio_setmode: trying PAL-B/G NICAM [5.500/5.850 MHz] Oct 11 18:35:27 flow kernel: saa7134[0]/audio: tvaudio_setmode: using PAL-B/G FM-stereo [5.500/5.742 MHz] -- snip -- Regards, Christian Larsen
