Yup I can confirm this as well... I got everything working up to the stage of getting a picture with xawtv - no audo tho. I'm running the 2.4.18 kernel. I tried setting mixer_nr=2 with no joy. Next on to try Barrie's HOWTO with the 2.4.19 kernel... thanks Barrie! :) > Hi, > > I'm glad it's not only me suffering with the flyvideo3k's sound problem. I'd > like to mention an additional piece of info which *might* help debugging > the problem. It's kinda voodoo right again, but is reproducable. I still > don't get any sound when using from xawtv, but I do get proper sound from > the tvcard following the steps: > > 1. modprobe saa7134 card=2 > 2. start xawtv, and exit > 3. rmmod saa7134 > 4. modprobe saa7134 card=3 (yep, i know that's for flyvideo2k) > > At this point I hear the sound of the last tuned tv channel, but as soon as > I start xawtv, the sound is gone right again. I were unable to get any sound > while xawtv is running, nor with loading the saa7134 driver with the right > settings for my card (card=2).. > > I'd do anything (ok, almost anything ;) to help track down this problem. If > any developer could jump in debugging the problem, please mail me some > instructions to try out on my config, I'll answer ASAP with the results. > > Best regards, > Christopher Jozsa > > ps. my config is: gentoo linux, kernel 2.4.19 patched with gentoo stuff, > v4l2 and saa7134 0.1.10 (i've tried the 3 previous driver versions as well) > > ps2. xawtv, sound from flyvideo3k still works on my old debian box without a > hitch(!), so I guess the cabeling and mixer settings are correct -- James Budworth tsuki_yomi@xxxxxxxxxxxxxxxxxx
