*This message was transferred with a trial version of CommuniGate(tm) Pro* I've bought the Pinnacle PCTV pro tv-card. But I can't receive any channel (only one which is always the same on every channel). Accordingly Pinnacle I have a NEW pinnacle PCTV pro card which is using the Philips SAA 7134 (tuner chip) and the 'old' Conexant CN878 chip. I've tried many cards and all the tuners but no difference. I've tried from kernel 2.4.19.x to 2.4.20-pre4.......... and even with the newest bttv drivers downloaded from the bttv-site. Output of dmesg (after loading the modules) ---- i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.96 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:11.0 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:11.1 bttv0: Bt878 (rev 17) at 00:11.0, irq: 11, latency: 32, mmio: 0xd8000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: miro: id=30 tuner=4 radio=matchbox stereo=yes bttv0: using tuner=4 bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: init: chip=MSP3410G-B11, has NICAM support msp3410: daemon started bttv0: i2c attach [client=MSP3410G-B11,ok] i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 bttv0: i2c attach [client=NoTuner,ok] i2c-core.o: client [NoTuner] registered to adapter [bt848 #0](pos. 1). bttv0: registered device video1 bttv0: registered device vbi0 bttv0: registered device radio0 ------ (video0 = webcam, but without the webcam it isn;t working also) Is this an unsupported new tuner chip or is there a different problem ?!?! Please help Sander
