Hi, I'm stuck with the attempt to watch tv with my AIW radeon -xawtv shows nothing but flickering- and hope for help! here's part of my config: -Kernel 2.4.18 (SuSE 8.0) with * CONFIG_VIDEO_DEV=m * CONFIG_I2C=m * CONFIG_I2C_ALGOBIT=m -gatos ATI-4.2.0 is succesfully installed, kernel-modules videodev & radeon are loaded. -X starts up fine with DRM & DRI -bttv compiled within ori(SuSE) 2.4.18 kernel sources -(compiling bttv-0.7.96 stand-alone fails for whatever reason) PROBLEM(?): modprobe bttv says: /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: init_module: No such device /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: insmod /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o failed /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: insmod bttv failed Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters ALTHOUGH dmesg |grep [video,bttv,i2c] results in: agpgart: agpgart: Detected an Intel i815, but could not find the secondary device. Assuming a non-integrated video card. Linux video capture interface: v1.00 bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is PCI device 8086:1130 i2c-core.o: i2c core module version 2.6.2 (20011118) i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118) possible hints: -there's no /dev/i2c* and no /proc/video/dev/ (needed??) -(scantv is not avaliable?!) -kwintv complains about: can't open /dev/video: No such device (although it's there, see below) Warning: kwintv: kv4lsetup had some trouble, trying to continue anyway. Fatal: v4lx: Error opening v4lx device /dev/video: Kein passendes Gerät gefunden in ::v4lxif -lrwxrwxrwx 1 root video 11 Aug 10 23:09 /dev/video -> /dev/video0 crw-rw---- 1 root video 81, 0 Aug 10 23:09 /dev/video0 crw-rw---- 1 root video 81, 1 Aug 10 23:09 /dev/video1 crw-rw---- 1 root video 172, 0 Mär 23 20:50 /dev/video1394 crw-rw---- 1 root video 81, 2 Aug 10 23:09 /dev/video2 crw-rw---- 1 root video 81, 3 Aug 10 23:09 /dev/video3 -cat /etc/modules.conf |grep [bttv, i2c, video]: options bttv pll=0 radio=0 card=0 alias char-major-81-0 bttv options i2c-core i2c_debug=1 options i2c-algo-bit alias char-major-89 i2c-dev alias char-major-81 videodev -options bttv card=63 or 64 (see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST) in modules.conf does NOT help for modprobe bttv Any help, hints would be greatly appreciated! (btw.: watching TV with this card when booting W2K works, so there's no hardware problem) Regards, Ditmar.
