Ok. Maybe someone can make sense of this output ... Also, see output below. Shared interrupt 9?? "Gerd Knorr" <kraxel@xxxxxxxxxxx> wrote in message news:slrnajqfb7.31u.kraxel@xxxxxxxxxxxxxx > > Any idea of what might be going on? Is this a bug with saa7134 and = > > FlyVideo 3000 TV Cards? > > Maybe not specific to the FlyVideo, I have seen simliar reports for > the Tevion MD 9717 (Aldi TV card) too. Can't reproduce it localy > through. > > > Attached is .xawtv and lsmod output. Can easily provide anything else = > > that might help diagnose bug/problem. > > Set the debug_audio=1 insmod option and check the kernel messages. > Likely the driver doesn't find the audio carrier... > /var/log/messages output.... Jul 23 19:44:29 kernel: saa7130/34: v4l2 driver version 0.1.8 loaded Jul 23 19:44:29 kernel: PCI: Found IRQ 9 for device 00:0b.0 Jul 23 19:44:29 kernel: PCI: Sharing IRQ 9 with 00:07.2 Jul 23 19:44:29 kernel: PCI: Sharing IRQ 9 with 00:07.3 Jul 23 19:44:29 kernel: PCI: Sharing IRQ 9 with 00:08.0 Jul 23 19:44:29 kernel: saa7134[0]: found at 00:0b.0, rev: 1, irq: 9, latency: 32, mmio: 0xdb002000 Jul 23 19:44:29 kernel: saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,insmod option] Jul 23 19:44:29 kernel: tuner: probing saa7134[0] i2c adapter [id=0x90000] Jul 23 19:44:29 kernel: saa7134[0]/irq: looping -- clearing enable bits Jul 23 19:44:29 kernel: tuner: chip found @ 0xc2 Jul 23 19:44:29 kernel: i2c-core.o: client [Philips PAL] registered to adapter [saa7134[0]](pos. 0). Jul 23 19:44:29 kernel: i2c-core.o: adapter saa7134[0] registered as adapter 0. Jul 23 19:44:29 kernel: saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff Jul 23 19:44:29 kernel: saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jul 23 19:44:29 kernel: saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jul 23 19:44:29 kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jul 23 19:44:29 kernel: saa7134[0]: registered device video0 [v4l2] Jul 23 19:44:29 kernel: saa7134[0]: registered device vbi0 Jul 23 19:44:29 kernel: saa7134[0]: registered device radio0 Jul 23 19:44:29 kernel: saa7134[0]: registered device dsp0 Jul 23 19:44:29 kernel: saa7134[0]: registered device mixer0 Jul 23 19:44:53 kernel: i2c-core.o: client [Philips PAL] unregistered. Jul 23 19:44:53 kernel: i2c-core.o: adapter unregistered: saa7134[0] Jul 23 19:44:53 kernel: i2c-core.o: unregister_adapter adap [saa7134[0]] not found. Jul 23 19:45:00 kernel: saa7130/34: v4l2 driver version 0.1.8 loaded Jul 23 19:45:00 kernel: PCI: Found IRQ 9 for device 00:0b.0 Jul 23 19:45:00 kernel: PCI: Sharing IRQ 9 with 00:07.2 Jul 23 19:45:00 kernel: PCI: Sharing IRQ 9 with 00:07.3 Jul 23 19:45:00 kernel: PCI: Sharing IRQ 9 with 00:08.0 Jul 23 19:45:00 kernel: saa7134[0]: found at 00:0b.0, rev: 1, irq: 9, latency: 32, mmio: 0xdb002000 Jul 23 19:45:00 kernel: saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,insmod option] Jul 23 19:45:00 kernel: tuner: probing saa7134[0] i2c adapter [id=0x90000] Jul 23 19:45:00 kernel: saa7134[0]/irq: looping -- clearing enable bits Jul 23 19:45:00 kernel: tuner: chip found @ 0xc2 Jul 23 19:45:00 kernel: i2c-core.o: client [Philips PAL] registered to adapter [saa7134[0]](pos. 0). Jul 23 19:45:00 kernel: i2c-core.o: adapter saa7134[0] registered as adapter 0. Jul 23 19:45:00 kernel: saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff Jul 23 19:45:00 kernel: saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jul 23 19:45:00 kernel: saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jul 23 19:45:00 kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jul 23 19:45:00 kernel: saa7134[0]: registered device video0 [v4l2] Jul 23 19:45:00 kernel: saa7134[0]: registered device vbi0 Jul 23 19:45:00 kernel: saa7134[0]: registered device radio0 Jul 23 19:45:00 kernel: saa7134[0]: registered device dsp0 Jul 23 19:45:00 kernel: saa7134[0]: registered device mixer0 Jul 23 19:45:12 kernel: tuner: radio freq (0.00) out of range (65-108) --------------------------- This shows usb on same interrupt as usb. Bad???? # cat /proc/interrupts CPU0 0: 2544524 XT-PIC timer 1: 4022 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 35602 XT-PIC eth0, eth1 8: 1 XT-PIC rtc 9: 31 XT-PIC usb-uhci, usb-uhci, saa7134[0] 10: 2568340 XT-PIC eth2 11: 751 XT-PIC ide2, ide3 12: 24369 XT-PIC PS/2 Mouse 14: 56958 XT-PIC ide0 15: 22 XT-PIC ide1 NMI: 0 LOC: 2546926 ERR: 5055 MIS: 0 --Geoff
