On Thu, 18 Jul 2002 18:45:40 +0200 Bill Eldridge <bill@xxxxxxx> wrote: > > Note that the MSP3400 module seems to load even if there's no > MSP34xx on your card at all, so this is inconclusive. msp3400 autoloads only on the 2 pc's where the TV sound works > Do you have a Rave (39) or a PCTV Studio Pro (52)? Its a PCTV Studio Pro (52) > (it's autodetecting 39, but you're overriding with 52) yes-because its Studio Pro..doesn't seem to make a difference > What's the miro: id=18 line? thats what bttv prints out > Are your modules.conf identical? yes, heres the relevant section: # bttv alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=52 pll=1 radio=1 #options tuner debug=1 > mikepolniak wrote: > > My Pinnacle PCTV card using xawtv works fine in my two pc's with a SiS650 > > and a SiS745 chipset. But when i put the card in my third pc with a > > SiS646(645dx) chipset > > the video works but sound fails because bttv doesn't find MSP3400: > > > > bttv: driver version 0.7.91 loaded > > bttv: using 2 buffers with 2080k (4160k total) for capture > > bttv: Host bridge is PCI device 1039:0646 (Silicon Integrated Systems > > [SiS])<------- > > bttv: Bt8xx card found (0). > > bttv0: Bt878 (rev 17) at 00:0c.0, irq: 11, latency: 32, memory: 0xfc000000 > > bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 > > bttv0: using: BT878(Pinnacle PCTV Studio Pr) [card=52,insmod option] > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > bttv0: miro: id=18 tuner=2 radio=fmtuner stereo=no > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > <------------------------------ > > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > > bttv0: i2c attach [client=Philips NTSC,ok] > > bttv0: registered device video0 > > bttv0: registered device vbi0 > > bttv0: registered device radio0 > > > > I am using the same kernel on all three pc's and even tried 2.4.19-rc1-ac1 > > but still get the same MSP34XX not found. I can modprobe msp3400 ok, but > > that doesn't help. On the two pc's where sound works i get MSP34xx found > > and registered and msp3410 daemon started: > > > > Jul 13 20:03:09 gent kernel: bttv0: i2c: checking for MSP34xx @ 0x80... > > found > > Jul 13 20:03:09 gent kernel: i2c-core.o: driver i2c msp3400 driver > > registered. > > Jul 13 20:03:09 gent kernel: msp34xx: init: chip=MSP3451G-A2, has NICAM > > support > > Jul 13 20:03:09 gent kernel: msp3410: daemon started > > Jul 13 20:03:09 gent kernel: bttv0: i2c attach [client=MSP3451G-A2,ok] > > Jul 13 20:03:09 gent kernel: i2c-core.o: client [MSP3451G-A2] registered > > to > > > > Any clues to this problem greatly appreciated. > > > > > > > > _______________________________________________ > > Video4linux-list mailing list > > Video4linux-list@xxxxxxxxxx > > https://listman.redhat.com/mailman/listinfo/video4linux-list > > > > -- > Bill Eldridge > Radio Free Asia > bill@xxxxxxx > > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list
