Wieslaw, Thanks for your reply. The card is connected up properly to the sound card. I don't quite know how to check the line in pipe. Anyway, my setup is as follows, I'm using the KDE kmix which shows two mixers, one which is called saa7134. All the settings are turned up. Also, one strange thing I've noticed is that if the card is set to receive untuned stations, (ie white noise ) I hear white noise through the speakers. But, if the card is tuned to a station there is only silence. Tom On Sun, 7 Jul 2002 10:08, WK wrote: > Dnia sob 6. lipiec 2002 02:17, Thomas L. Bevan napisał: > > Hi all, > > > > I'm hoping someone can give me some suggestions. > > I've compiled the SAA7134 driver successfully, and > > I can watch TV but not hear any sound. > > > > Does anyone have a solution or some idea on how > > to narrow down where the problem might be? > > > > Tom > > First you must join audio out on tv card and line in on soundcard. > Then check how line in pipe is set (with any mixer). > If all is right, then try to: > clean saa7134 module (rmmod saa7134) > start sound (any sound application mixer is the best) > set line in and volume to some high level > start xawtv > Wieslaw > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list
