Re: Philips 7134 sound problem(?)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hey there...         <( http://www.matthew2k.de.vu )>-=-<( powered by linux)>

In reply to my own mail, I just figured the tvaudio thread is  being  started
and there are debug message which clearly show that when TV input is selected
the audio gets unmuted... but still... no audio until that radio tool is used
and then only in mono and only as long as one doesn't switch the channel. :(

Here some debug, maybe that helps too...

kernel: saa7134[0]/audio: tvaudio thread scan start[1]
kernel: saa7134[0]/audio: scanning 5.500 MHz =>  dc is     0 [0/0]
kernel: saa7134[0]/audio: scanning 6.000 MHz =>  dc is     0 [0/0]
kernel: saa7134[0]/audio: scanning 6.500 MHz =>  dc is     0 [0/0]
kernel: saa7134[0]/audio: found PAL-BGHI main sound carrier @ 0.000 MHz
kernel: saa7134[0]/audio: ctl_mute=0 automute=0 input=Television  =>  mute=0 input=Television
kernel: saa7134[0]/audio: ctl_mute=1 automute=0 input=Television  =>  mute=1 input=Television
kernel: saa7134[0]/audio: ctl_mute=0 automute=0 input=Television  =>  mute=0 input=Television
kernel: saa7134[0]/audio: ctl_mute=1 automute=0 input=Television  =>  mute=1 input=Television

And this comes out generally for initiliazing the saa7134 module:

kernel: saa7130/34: v4l2 driver version 0.1.6 loaded
kernel: PCI: Found IRQ 11 for device 00:09.0
kernel: saa7134[0]: found at 00:09.0, rev: 1, irq:11, latency: 24, mmio: 0xef001000
kernel: saa7134[0]: subsystem: 1131:0000, board:LifeView FlyVIDEO3000
kernel: saa7134[0]: Huh, no eeprom present (err=-5)?
kernel: saa7134[0]/video: DCSDT: no signal
kernel: saa7134[0]/video: DCSDT: no signal
kernel: tuner: probing saa7134[0] i2c adapter[id=0x90000]
kernel: tuner: chip found @ 0xc0
kernel: saa7134[0]: registered device video0 [???]
kernel: saa7134[0]: registered device vbi0
kernel: saa7134[0]: registered device radio0
kernel: saa7134[0]: registered device dsp1
kernel: saa7134[0]: registered device mixer1
kernel: saa7134[0]/video: DCSDT: no signal
kernel: saa7134[0]/video: DCSDT: found PAL

And back to debugging. :-)
Matthew.

--
]) matthew2k@xxxxxx, GPG 0x51FA41C6, matthew2k on JABBER.org, ICQ# 89464954 ([





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux