Is this the bttv option pll??? As I have tried it set to 0, 1 and 2, they don't seem to have an effect. Maybe I'm not doing it correctly. I put in the line 'options bttv pll=2' into my modules.conf file and then remove the running bttv module with 'rmmod bttv' reload bttv with modprobe and then test the video card again with xawtv. Is this correct?? I'm using PAL input from a VCR at the moment and the video tape is definitely colour. The actual chipset on the cards are bt878 does this matter. I think bttv.o supports 878 ??!!?? Rob >>> joni.kahara@xxxxxxx 02/05/02 18:30:46 >>> > I have recently installed a Tep TV TV Tuner Card in my Linux box, this > card has a BT848 chipset. It has S-Video, composite and antennae inputs. > I'm trying to capture and display PAL video through the composite input > but I can't seem to get a colour picture. I use xawtv with the composite > input, and the video mode to PAL-NC (that gives the clearest picture) > but the only pictures I get are black and white not colour. > Sounds like you may have selected a wrong standard, set modprobe option to select PAL clock (if PAL is what you are using.) Jonk
