Finally.
I found (in video4linux-list archive) all informations tu set up my TV. I
mean insmod options.
But the metter.
1) Bytesex Team (saa module and xawtv works very well - regards) - I made it
yet, but for the next newbie, in saa7134 modules tar ball it would be
usefull to add some comments in CARDSLIST or, just like in bttv drivers
set - some Modules.conf and Insmod.options files. And in the web page
"recent modutils (>=2.4.14) with EXPORT_SYMBOL_GPL support" instead "recent
modutils with EXPORT_SYMBOL_GPL support".
2) Allan Frank (unresolved vmalloc_to_page) - check your sound, tmpfs and
i2c configuration (see). When you patch 2.4.19-pre6 with 2.4.19-pre4
bytesex.org patches - notify the Hunks. If you see any fuzz or offset too,
try only linux-2.4.19-pre4.
3) For myself - I do not know to set up correctly MPlater configuration to
compile it to work well with saa7134.
configure says:
TV interface yes.
TV video4linux interface yes.
But:
bash-2.05# gmplayer -tv on:driver=v4l
MPlayer CVS-020314-06:00-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)
CPU vendor name: AuthenticAMD max cpuid level: 1
CPU: Advanced Micro Devices Athlon TB Thunderbird (Type: 6, Stepping: 2)
extended cpuid-level: 6
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with features: MMX MMX2 3DNow 3DNowEx
Reading config file:
/home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or
directory
vo: X11 running at 1280x1024 with depth 24 and 32 bits/pixel (":0.0" =>
local display)
Reading /root/.mplayer/codecs.conf: 29 audio & 80 video codecs
Font /root/.mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux's hardware RTC timing (1024Hz)
Parsing input config file /root/.mplayer/input.conf
Input config file /root/.mplayer/input.conf parsed : 51 binds
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
[ws] Display name: :0.0 => local display.
[ws] Screen depth: 32
[ws] size: 1280x1024
[ws] red mask: 0xff0000
[ws] green mask: 0xff00
[ws] blue mask: 0xff
[ws] XShm version is 1.1
[ws] XShape version is 1.0
[ws] Initialized converter: rgb32 to rgb32
[ws] atomname: _VIDEO_REMOTE
[ws] window is created. ( ViDEO ).
[ws] atomname: _MPLAYER_REMOTE
[ws] window is created. ( MPlayer ).
[ws] atomname: _MPLAYER_MENU_REMOTE
[ws] window is created. ( MPlayer menu ).
Odtwarzam TV
(Plaing TV)
Selected driver: v4l
name: Video 4 Linux input
author: Alex Beregszaszi <alex@xxxxxxxxxx>
comment: under development
Selected device: saa7134[0]
Capabilites: capture tuner overlay clipping frameram
Device type: 107
Supported sizes: 48x32 => 720x576
Inputs: 4
0: Television: tuner audio tv camera (tuner:1, norm:0)
1: Composite1: (tuner:0, norm:0)
2: Composite2: (tuner:0, norm:0)
3: S-Video: (tuner:0, norm:0)
Audio devices: 1
Using input 'Television'
Selected norm: pal
Selected channel list: europe-east (including 133 channels)
palette: 15, depth: 12, bytesperline: 72
Picture values:
Depth: 12, Palette: 15 (Format: Planar YV12)
Brightness: 26985, Hue: 32896, Colour: 33026, Contrast: 34574
CACHE_PRE_INIT: 0 [0] 0 pre:1677721 eof:0
Cache fill: 0,00% (0 bytes) Detected TV! ;-)
Output format: Planar YV12
fps: 25,000000, frametime: 0,040000
(...)
Audio: brak dzwieku!!! (no sound)
#(now the sound is going to be active on Line out)
Poczatek odtwarzania (start plaing)
MPlayer przerwany sygnalem 11 w module: decode_video
(MPlayer stopped with signal 11 in module: decode_video)
*** free_stream() called ***
Przerwany potok
(Broken stream)
and finish
for ./mplayer and ./mplayerxp, other colours depths and resolutions all
looks the same.
Did somebody saw somthing like that?
