I decided to try out mp1e for recording on a low powered PC. I am using mp1e
from the RTE CVS. It runs but it never returns to the shell prompt. Is this normal?
Or am I forgetting something.
# mp1e -vv -C pmmx -n 779 -s 320x240 -b 1800 -f 29.97 -a 0 -B 160 -S 22.05 > "/export/home/video/test.mpeg"
Opened OSS PCM device /dev/dsp
Opened /dev/video ('BT848A(Aimslab VHX)')
Video standard is NTSC
Using mmap interface, 2 capture buffers granted.
Mapping capture buffers
Grab 1st frame and set capture format and dimensions.
Filter 'YUYV 4:2:2 w/vertical decimation'
Allocated 24 bounce buffers.
V4L capture thread launched
Audio compression 22.1 kHz (MPEG-2) stereo at 160 kbits/s (4.4 : 1)
Psychoacoustic threshold table #4
Macroblocks 20 x 15
Video compression 320 x 240, 30.0 frames/s at 1.80 Mbits/s (15.3 : 1)
Motion compensation disabled
Audio compression thread launched
Video compression thread launched
0:25 (5.8 MB), system load 100.0 %, 2.64 % dropped
Audio: End of file
Video: End of filetem load 100.0 %, 2.70 % dropped
0:26 (6.0 MB), system load 100.0 %, 2.70 % dropped
mp1e: Done.
Thanks,
Greg
