Re: Zoltrix TV-Max NTSC and xawtv

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Stef,

I Really appreciate your prompt reply.
I will try your suggestion, however I am a bit puzzled
for three reasons:
-card # 46 is the Genie TV, which, as far as I know is
a BT878 card and mine is a TVmax basd on the BT848
-my card has a sound output connector (mini jack,
3.5mm) as well as in/out connectors for the cdrom
audio so that you can route the cdrom through the
tvmax
-documentation only calls for 640x480 maximum
resolution, is it actually possible to get it going at
1024x768?

I also run Mandrake (8.1) with a 2.4 kernel. FYI,
video is 3dfx 3/2000 and audio sblive value/oem.

I would appreciate some clarifications.
Thank you very much.


Regards,
Arthur


--- Stef Telford <stef@xxxxxxxxxxxxxxxxxxxxxx> wrote:
> 	Hi everybody,
> 
> Hello.
> 
> 	I just subscribed to this list, so I don't know if
> 	there are any threads on the same subject. So
> please
> 	don't kill me yet. :)
> 
> Personally havent seen any threads on Zoltrix cards
> recently. Then again, there was a thread -I- was
> going
> to start on the Zoltrix TV-Max shortly (dont panic
> jst yet until you hear the problem :)
> 	
> 	I am trying to get my above-mentioned card to work
> 	with xawtv, and so far I can't seem to find proper
> 	documentation on whether the Zoltrix card equipped
> 	with an NTSC tuner works with the bttv driver. I
> 	looked at the chips on my board and they don't seem
> to
> 	be listed among the known-to-work chips.
> 
> 	So here goes: did anybody get the darn' thing
> going?
> 	If so, would you share the insmod options u used?
> 
> on my mandrake machine, its relatively easy to get
> up
> and running. add into your /etc/modules.conf the
> line
> 
> 	options bttv card=46
> 
> also you should add into the /etc/modules the bttv
> module
> name so that it is automatically loaded during
> startup.
> The kernel i am running (if it makes any difference)
> is
> 2.4.13 with the patches from
> http://bytesex.org/patches/
> (namely the videodev and v4l2 ones). 
> 
> without these, you can only get the Zoltrix TV-Max
> card
> into 320x240. However, using the v4l2 driver patches
> you can manage to get fullscreen working (1024x768)
> not a
> problem. 
> 
> 
> NOW
> 
> 
> the problem -i- have is in trying to get btaudio
> working
> from the Zoltrix TV-Max to my ES1371 soundcard (Live
> card)
> yet it doesnt seem to work. Yes, have tried the 'sox
> trick'
> and have tried lots of other things to get the
> internal
> sound connection working, mainly because the Zoltrix
> card
> does not have a sound output, otherwise i would loop
> it
> back into the mic in on the back of my soundcard. 
> 
> What is the long and short of this ? 
> 
> well, can record fine from TV but there is no way
> that sound
> also gets recorded. Picture quality (using NVrec) is
> jst
> flawless. So. if any has managed to get btaudio
> working
> then please make our christmas and let us all know
> how :)
> 
> 	Thanks in advance.
> 
> Hope this helps you.
> Happy holidays 
> Stef
> 
> 
> 
> _______________________________________________
> Video4linux-list mailing list
> Video4linux-list@xxxxxxxxxx
>
https://listman.redhat.com/mailman/listinfo/video4linux-list


______________________________________________________ 
Send your holiday cheer with http://greetings.yahoo.ca





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux