I have mandrake 8.1 kernel 2.4.8-34.1mdk I have download usbvision-0.3.1-test2-2.4.6.tgz and rebuild my kernel. v4l-conf v4l-conf: using X11 display :0.0 dga: version 2.0 mode: 1024x768, depth=24, bpp=32, bpl=4096, base=0xe0000000 /dev/video0 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument /dev/video0 [v4l]: configuration done XawTV -hwscan This is xawtv-3.65, running on Linux/i686 (2.4.8-34.1mdk) looking for available devices port 43-43 type : Xvideo, image scaler name : Savage Streams Engine /dev/video0: OK [ -device /dev/video0 ] type : v4l name : USBVISION USB Video flags: overlay capture tuner XawTV This is xawtv-3.65, running on Linux/i686 (2.4.8-34.1mdk) config: invalid value for input: Television valid choices for "input": "Composite 1", "S-Video", "" ioctl: VIDIOCMCAPTURE(0,fmt=7,size=64x48): Invalid argument ioctl: VIDIOCMCAPTURE(0,fmt=15,size=64x48): Invalid argument v4l: timeout (got SIGALRM), hardware/driver problems? ioctl: VIDIOCSYNC(0): Interrupted system call ioctl: VIDIOCMCAPTURE(0,fmt=4,size=64x48): Dispositivo o risorsa occupata ioctl: VIDIOCMCAPTURE(0,fmt=1,size=64x48): Invalid argument ioctl: VIDIOCMCAPTURE(0,fmt=13,size=64x48): Invalid argument Help me Thanks bye Andrea.
Dec 16 11:59:28 localhost kernel: i2c-core.o: i2c core module Dec 16 11:59:28 localhost kernel: i2c-dev.o: i2c /dev entries driver module Dec 16 11:59:28 localhost kernel: i2c-core.o: driver i2c-dev dummy driver registered. Dec 16 11:59:28 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module Dec 16 11:59:28 localhost kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, size 32768k Dec 16 11:59:28 localhost kernel: vesafb: mode is 800x600x16, linelength=1600, pages=33 Dec 16 11:59:28 localhost kernel: vesafb: protected mode interface info at c000:8460 Dec 16 11:59:28 localhost kernel: vesafb: scrolling: redraw Dec 16 11:59:28 localhost kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Dec 16 11:59:28 localhost kernel: Linux video capture interface: v1.00 Dec 16 11:59:28 localhost kernel: i2c-core.o: driver i2c msp3400 driver registered. Dec 16 11:59:28 localhost kernel: tvaudio: TV audio decoder + audio/video mux driver Dec 16 11:59:28 localhost kernel: tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) Dec 16 11:59:28 localhost kernel: i2c-core.o: driver generic i2c audio driver registered. Dec 16 11:59:28 localhost kernel: i2c-core.o: driver i2c tda7432 driver registered. Dec 16 11:59:28 localhost kernel: i2c-core.o: driver i2c TV tuner driver registered. Dec 16 11:59:28 localhost kernel: bttv: driver version 0.7.72 loaded Dec 16 11:59:28 localhost kernel: bttv: using 2 buffers with 2080k (4160k total) for capture Dec 16 11:59:28 localhost kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Dec 16 11:59:28 localhost kernel: agpgart: Maximum main memory to use for agp memory: 439M Dec 16 11:59:28 localhost kernel: agpgart: Detected Via Apollo Pro chipset Dec 16 11:59:28 localhost kernel: agpgart: AGP aperture is 32M @ 0xe6000000 Dec 16 11:59:28 localhost kernel: usb.c: registered new driver usbdevfs Dec 16 11:59:28 localhost kernel: usb.c: registered new driver hub Dec 16 11:59:28 localhost kernel: usb.c: registered new driver usbvision Dec 16 11:59:28 localhost kernel: i2c-core.o: driver i2c saa7111 driver registered. Dec 16 11:59:28 localhost kernel: usb-uhci.c: $Revision: 1.259 $ time 22:55:45 Dec 15 2001 Dec 16 11:59:28 localhost kernel: usb-uhci.c: High bandwidth mode enabled Dec 16 11:59:28 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9 Dec 16 11:59:28 localhost kernel: usb-uhci.c: Detected 2 ports Dec 16 11:59:28 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Dec 16 11:59:28 localhost kernel: hub.c: USB hub found Dec 16 11:59:28 localhost kernel: hub.c: 2 ports detected Dec 16 11:59:28 localhost kernel: PCI: Found IRQ 9 for device 00:04.3 Dec 16 11:59:28 localhost kernel: PCI: Sharing IRQ 9 with 00:04.2 Dec 16 11:59:28 localhost kernel: PCI: Sharing IRQ 9 with 00:09.0 Dec 16 11:59:28 localhost kernel: PCI: Sharing IRQ 9 with 00:0d.0 Dec 16 11:59:28 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9 Dec 16 11:59:28 localhost kernel: usb-uhci.c: Detected 2 ports Dec 16 11:59:28 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Dec 16 11:59:28 localhost kernel: usb.c: new USB bus registered, assigned bus number 2 Dec 16 11:59:28 localhost kernel: hub.c: USB hub found Dec 16 11:59:28 localhost kernel: hub.c: 2 ports detected Dec 16 11:59:28 localhost kernel: usb-uhci.c: v1.251:USB Universal Host Controller Interface driver Dec 16 11:59:28 localhost kernel: usbvision_probe(dfc79600,0.) Dec 16 11:59:28 localhost kernel: usbvision: Miro PCTV USB Italy found Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: hw routines for usbvision #0 registered. Dec 16 11:59:28 localhost kernel: i2c-dev.o: Registered 'usbvision #0' as minor 0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 128 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x40 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 128 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x40 msg #0 Dec 16 11:59:28 localhost kernel: msp3400: chip reset failed, penguin on i2c bus? Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 128 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x40 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 130 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x41 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 132 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x42 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 150 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x4b msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 152 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x4c msg #0 Dec 16 11:59:28 localhost kernel: ip_tables: (c)2000 Netfilter core team Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 180 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x5a msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 182 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x5b msg #0 Dec 16 11:59:28 localhost kernel: ip_conntrack (4095 buckets, 32760 max) Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 138 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x45 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 192 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x60 msg #0 Dec 16 11:59:28 localhost kernel: tuner: chip found @ 0xc2 Dec 16 11:59:28 localhost kernel: usb_usbvision-0: i2c attach [Philips PAL] Dec 16 11:59:28 localhost kernel: i2c-core.o: client [Philips PAL] registered to adapter [usbvision #0](pos. 0). Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 196 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x62 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 198 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x63 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 200 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x64 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 202 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x65 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 204 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x66 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 206 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x67 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 208 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x68 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 210 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x69 msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 212 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x6a msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 214 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x6b msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 216 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x6c msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 218 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x6d msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 220 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x6e msg #0 Dec 16 11:59:28 localhost kernel: i2c-algo-usb.o: needed 3 retries for 222 Dec 16 11:59:28 localhost kernel: i2c-algo-usb: NAK from device adr 0x6f msg #0 Dec 16 11:59:28 localhost kernel: saa7111_read 0x11 Dec 16 11:59:28 localhost kernel: saa7111_attach: chip version 11 Dec 16 11:59:28 localhost kernel: saa7111: init Dec 16 11:59:28 localhost kernel: usb_usbvision-0: i2c attach [saa7111] Dec 16 11:59:28 localhost kernel: i2c-core.o: client [saa7111] registered to adapter [usbvision #0](pos. 1). Dec 16 11:59:28 localhost kernel: i2c-core.o: adapter usbvision #0 registered as adapter 0. Dec 16 11:59:28 localhost kernel: hub.c: USB new device connect on bus2/1, assigned device number 2 Dec 16 11:59:28 localhost kernel: usb.c: USB device 2 (vend/prod 0x4b8/0x1) is not claimed by any active driver. Dec 16 11:59:28 localhost kernel: usb.c: registered new driver usblp Dec 16 11:59:28 localhost kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 Dec 16 11:59:28 localhost kernel: printer.c: v0.8:USB Printer Device Class driver