Hi, I'm having problems with xawtv and Hauppauge WinTV card. I have perfect radio reception, TV sound is OK as well. Only the picture I get is like six incarnations of what I should see, jumping up and down. It used to work perfectly well until last week-end when I lost the partition xawtv was located. I reinstalled it's 3.65 version and bttv version 0.7.87. I don't remember what version I was using before but it must have been at least half a year old one. I tried kernel 2.4.2 and 2.4.16, same problems. I've started to think the card could be broken but this would be quite a coincidence. I would be really grateful if somebody could kick me in the right direction. I'll attach relevant logs from /var/log/syslog Thanks for your time. Regards, Chris kernel: bttv: driver version 0.7.87 loaded kernel: bttv: using 2 buffers with 2080k (4160k total) for capture kernel: bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133] kernel: bttv: Host bridge is VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] kernel: bttv: Bt8xx card found (0). kernel: PCI: Found IRQ 10 for device 00:0b.0 kernel: PCI: The same IRQ used for device 00:0b.1 kernel: PCI: The same IRQ used for device 00:11.0 kernel: bttv0: Bt878 (rev 17) at 00:0b.0, irq: 10, latency: 32, memory: 0xe1000000 kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb kernel: bttv0: using: BT878(Hauppauge (bt848)) [card=2,insmod option] kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... kernel: i2c-algo-bit.o:1 scl: 1 sda: 0 kernel: i2c-algo-bit.o:2 scl: 1 sda: 1 kernel: i2c-algo-bit.o:3 scl: 0 sda: 1 kernel: i2c-algo-bit.o:4 scl: 1 sda: 1 kernel: i2c-algo-bit.o: bt848 #0 passed test. kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. kernel: bttv0: Hauppauge eeprom: model=38074, tuner=Philips FM1216 (5), radio=yes kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found kernel: tvaudio: TV audio decoder + audio/video mux driver kernel: tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic1 kernel: i2c-core.o: driver generic i2c audio driver registered. kernel: i2c-core.o: driver i2c TV tuner driver registered. kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005] kernel: tuner: chip found @ 0xc2 kernel: tuner: type set to 5 (Philips PAL) kernel: bttv0: i2c attach [client=Philips PAL,ok] kernel: i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 0). -- Chris Osicki osk@xxxxxx
