I have the same card, run XFree86 4.1.0, have the ati.2 drivers and xawtv from //www.linuxvideo.org/gatos/ installed and have no problems. here is my .xawtv config: [global] freqtab = us-bcast pixsize = 128 x 96 pixcols = 1 jpeg-quality = 75 mjpeg-quality = 50 keypad-ntsc = no osd = yes [defaults] norm = ntsc input = tuner capture = over color = 50% bright = 60% hue = 50% contrast = 50% volume = 75% On Fri, 26 Oct 2001 11:16:34 +0100 (BST) D R Magee <drm@xxxxxxxxxxxxxxxx> wrote: > Hi, > > I've installed a bttv based winTV card under RH7.1 as /dev/video0. All seems > well (messages in the log file indicate everything is OK) and the radio is > working. When I use xawtv however the screen is black (xawtv reports no errors). > Under some code we've written here I can open the device, query it's properties > OK (they seem sensible) and set it up for channel 2 (s-video input). Querying > image size even gives sensible results. The problem is (again) when reading > from the card (using read()) the image is black. The card works fine under > windows2000. > > My graphics card is an ATI rage 128 pro ... I've tried disabling the DRI as > suggested in the xawtv README but still the same results. Any ideas greatly > appreciated. > > Many thanks > > Derek Magee > > Replies to: > drm@xxxxxxxxxxxxxxxx > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list