Hauppauge WINTV/GO. tuner: TV freq out of range error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Why am I getting this error:
    kernel: tuner: TV freq (0.-6) out of range (44-958)

I obviously, can't get the tuner to work.  I have tried letting the kernel
auto config, and also have set the tuner to type 2 and also type 17.  From
the infomation below the card clearly has the Philips NTSC M (type 17)
tuner.

Any ideas?  Your input is greatly appreciated.

-- Randall


------------------

When I scan for product info in WinNT it reports as:

Model 38101 Rev. B410
Serial #1866845
Tuner Formats: NTSC (M)
Tuner Audio: Mono
Video Formats: NTSC ( M ) PAL ( B G H I D K M N NCOMBO ) SECAM ( L L' )
Audio Outputs: BackPanel
External Inputs: 1
S-Video Inputs: 0
Teletext: Yes (Software)
Radio: None
Decoder: BT878
Tuner Model: Philips FI1236 MK2

EEprom Contents: 
84 12 00 00 05 50 0e 7f 08 0a 01 d5 94 50 44 89 00 00 00 00 00 
84 0a 00 01 01 20 77 00 40 5d 7c 1c 00 
74 02 01 00 02 
79 a1 


Here is what the syslog reports

-----------------------

Oct  4 00:16:33 amanita kernel: Linux video capture interface: v1.00
Oct  4 00:16:33 amanita kernel: i2c-core.o: i2c core module
Oct  4 00:16:33 amanita kernel: i2c-algo-bit.o: i2c bit algorithm module
Oct  4 00:16:34 amanita kernel: bttv: driver version 0.7.80 loaded
Oct  4 00:16:34 amanita kernel: bttv: using 2 buffers with 2080k (4160k total) for capture
Oct  4 00:16:34 amanita kernel: bttv: Host bridge is Intel Corporation 440LX/EX - 82443LX/EX Host bridge
Oct  4 00:16:34 amanita kernel: bttv: Host bridge needs ETBF enabled.
Oct  4 00:16:34 amanita kernel: bttv: Bt8xx card found (0).
Oct  4 00:16:34 amanita kernel: PCI: Found IRQ 9 for device 00:09.0
Oct  4 00:16:34 amanita kernel: PCI: Sharing IRQ 9 with 00:04.2
Oct  4 00:16:34 amanita kernel: PCI: Sharing IRQ 9 with 00:09.1
Oct  4 00:16:34 amanita kernel: bttv0: Bt878 (rev 17) at 00:09.0, irq: 9, latency: 32, memory: 0xe2000000
Oct  4 00:16:34 amanita kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Oct  4 00:16:34 amanita kernel: bttv0: using: BT878(Hauppauge (bt878)) [card=10,insmod option]
Oct  4 00:16:34 amanita kernel: bttv0: enabling ETBF (430FX/VP3 compatibilty)
Oct  4 00:16:34 amanita kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Oct  4 00:16:34 amanita kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  sda: 1 -- testing...
Oct  4 00:16:34 amanita kernel: i2c-algo-bit.o:1 scl: 1  sda: 0 
Oct  4 00:16:34 amanita kernel: i2c-algo-bit.o:2 scl: 1  sda: 1 
Oct  4 00:16:34 amanita kernel: i2c-algo-bit.o:3 scl: 0  sda: 1 
Oct  4 00:16:34 amanita kernel: i2c-algo-bit.o:4 scl: 1  sda: 1 
Oct  4 00:16:34 amanita kernel: i2c-algo-bit.o: bt848 #0 passed test.
Oct  4 00:16:34 amanita kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0.
Oct  4 00:16:34 amanita kernel: bttv0: Hauppauge eeprom: model=38101, tuner=Philips FI1236 MK2 (2), radio=no
Oct  4 00:16:34 amanita kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Oct  4 00:16:34 amanita kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Oct  4 00:16:34 amanita kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Oct  4 00:16:34 amanita kernel: tvaudio: TV audio decoder + audio/video mux driver
Oct  4 00:16:34 amanita kernel: tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
Oct  4 00:16:34 amanita kernel: i2c-core.o: driver generic i2c audio driver registered.
Oct  4 00:16:34 amanita kernel: i2c-core.o: driver i2c TV tuner driver registered.
Oct  4 00:16:34 amanita kernel: tuner: chip found @ 0xc2
Oct  4 00:16:34 amanita kernel: bttv0: i2c attach [client=Philips NTSC_M (MK2),ok]
Oct  4 00:16:34 amanita kernel: i2c-core.o: client [Philips NTSC_M (MK2)] registered to adapter [bt848 #0](pos. 0).
Oct  4 00:16:34 amanita kernel: bttv0: open called
Oct  4 00:16:34 amanita kernel: Display at e3000000 is 1152 by 864, bytedepth 2, bpl 2304
Oct  4 00:16:34 amanita kernel: bttv0: PLL: 28636363 => 35468950 ... ok
Oct  4 00:16:34 amanita kernel: bttv0: open called
Oct  4 00:16:34 amanita kernel: bttv0: open called
Oct  4 00:16:34 amanita kernel: bttv0: PLL: switching off
Oct  4 00:16:34 amanita kernel: tuner: tv freq set to 0.-6
Oct  4 00:16:34 amanita kernel: tuner: TV freq (0.-6) out of range (44-958)
Oct  4 00:16:34 amanita kernel: bttv0: cap vgrab: queue 0 (7:64x48)
Oct  4 00:16:34 amanita kernel: bttv0: cap sync: sleep on 0
Oct  4 00:16:34 amanita kernel: bttv0: cap irq: capture 0 [start]
Oct  4 00:16:34 amanita kernel: bttv0: cap irq: done 0
Oct  4 00:16:34 amanita kernel: bttv0: cap sync: buffer 0, retval 0
Oct  4 00:16:34 amanita kernel: bttv0: clip: ro=0f030000 re=0d3f0000
Oct  4 00:17:04 amanita last message repeated 10 times

------------------------------------------------

here is a dump of the pci headers.


00:09.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
	Subsystem: Hauppauge computer works Inc. WinTV/GO
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (4000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at e2000000 (32-bit, prefetchable) [size=4K]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 9e 10 6e 03 06 00 90 02 11 00 00 04 00 20 80 00
10: 08 00 00 e2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 44 00 00 00 00 00 00 00 09 01 10 28
40: 02 00 00 00 03 4c 00 00 00 00 00 00 01 00 22 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
	Subsystem: Hauppauge computer works Inc. WinTV/GO
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at e1800000 (32-bit, prefetchable) [size=4K]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 9e 10 78 08 06 00 90 02 11 00 80 04 00 20 80 00
10: 08 00 80 e1 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 44 00 00 00 00 00 00 00 09 01 04 ff
40: 02 00 00 00 03 4c 00 00 00 00 00 00 01 00 22 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00






[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux