On Mon, 24 Sep 2001, Andreas [iso-8859-1] M�ller wrote: > I'm using a Hauppauge WinTV PCI board and I'm using XFree86 V 4.01. I'd like > to watch TV on my monitor in fullscreen. I've found information that I have > to create a Modeline for X for the PAL resolution 768x576, where to get this > Modeline from? When using 800x600 the TV picture is not fullscreen... > > Can someone help here? Do you want to generate PAL scanrates - to drive a composite monitor or a TV, or are you just looking for a 768x576 mode for your monitor? If its the former, I use: Section "Monitor" # Mode suitable for driving bt869.o 720x576 mode Identifier "PAL TV via BT869" VendorName "Unknown" ModelName "Unknown" HorizSync 30-40 VertRefresh 45.0-55.0 # DisplaySize 426 320 Mode "720x576-BT869" DotClock 27.5 HTimings 720 744 800 880 VTimings 576 581 583 625 EndMode EndSection (well - that's 720x576 actually). Incidentally, I also have a patch for the bt869 driver in the lm_sensors package that will program the bt869 correctly to push this out to a TV/composite monitor. Steve