Re: No buffer space available ????

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi,

I am using the VideoWonder card, with Zoran 36120 and SAA7110 chip.
Do you have any ideas on my problem? 

Best regards,

-----Original Message-----
From: "bharat  tewari" <bharat.tewari@xxxxxxxxx>
Date: Fri, 21 Sep 2001 15:01:24 +0530
Subject: Re:  No buffer space available ????

> what is your graphics chipset?
> regards
> bharat
> 
> ----- Original Message ----- 
> From: Vu Thu Trang <vtrang@xxxxxxxxxxx>
> To: <video4linux-list@xxxxxxxxxx>
> Sent: Friday, September 21, 2001 2:58 PM
> Subject:  No buffer space available ????
> 
> 
> > Hi all of you,
> > 
> > Thanks to your great advice, I finally compiled successfully 
> > BigPhysarea with kernel 2.2.19. I checked and could see the
> bigphysarea 
> > in /proc. Thank you again a lot.
> > 
> > After successfully installing the kernel, I tried to compile the
> driver 
> > for the VideoWonder card (which comes with the SAA7110 & Zoran
> 36120 
> > chip). This is the result of my "lsmod"
> > 
> > ****************
> > Module                  Size  Used by
> > soundcore               2608   0  (autoclean) (unused)
> > zoran                  23728   0  (unused)
> > tuner                   2224   0  (unused)
> > saa7110                 2592   1 
> > videodev                2688   2  [zoran]
> > i2c                     3520   3  [zoran tuner saa7110]
> > ****************
> > 
> > Then I tried to check if the camera of mine works or not. I am not
> sure 
> > how to check it, but some website suggested me to run xawtv. I
> tried to 
> > install and run xawtv in X, but there are some bad errors: 
> > 
> > ****************
> > This is xawtv-3.54, running on Linux/i686 (2.2.19)
> > switching visual (0x25)
> > Xlib:  extension "XVideo" missing on display ":0.0".
> > can't open /dev/video0: No buffer space available
> > v4l-conf had some trouble, trying to continue anyway
> > v4l2: open /dev/video0: No buffer space available
> > v4l: open /dev/video0: No buffer space available
> > no video grabber device available
> > ****************
> > 
> > Now I dont know how to go on. Is my Webcam ready to work or not,
> and if 
> > OK, how can I check configure for it?
> > 
> > 
> > Thank you a lot and best wishes,
> > VTTrang
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Video4linux-list mailing list
> > Video4linux-list@xxxxxxxxxx
> > https://listman.redhat.com/mailman/listinfo/video4linux-list
> 
> 






[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux