Stephane Chauveau wrote: > > Hi, > I bought a Studio PcTV Rave (PAL - B/G Retail D/GB/F) a few > days ago and I can't get the sound to work internaly (but > I have sound on the external connector). > > I have upgraded my kernel 2.4.7 to bttv 0.7.73 and tried > several drivers and parameters including the module btaudio. > > CHIP: Conexant FUSION 878A > TUNER: Frontend 4106 FH5 / TEMIC 3X7 865 > > I suppose that the problem comes from the tuner. I haven't found > any interesting references to the 4106 FH5 in any linux doc or > mailing list. > > Someone with a good config? > Could that help to upgrade to v4l2/bttv 0.8.x? No. The tuner doesn't switch audio from external to internal output. Switching is proprietary and can be done in the MSP chip (if you have one) or via other device connected to GPIO (i.e. 4052 channel mux). Can you select between these two outputs in windows? If so, you can watch GPIO realtime with bttool or similar. A tool for reading MSP internal registers would be handy, but I don't know this exists.
