Frank Richter wrote: > Hello everybody, > > I'm new to the list. Is there any archive of the list available? > > I recently bought a Anubis Typhoon Tview TV Board > with bt878, mono sound, Philips PAL Tuner and without radio. > It works fine under win. > > I use bttv version 0.7.69 with kernel 2.2.19 and i2c 2.6.0. > Using xawtv, video works very fine, but sound doesn't at all. > I'm not sure, what the right type of the card is. I tried 24, 36 and 38, > but the problem remained. On anubis' web-site is only one hint to use > bttv und linux, but no configuration info. They have different drivers > for cards with the same name, but with 8-digit, 10-digit or 12-digit > serial numbers. Mine has a 12-digit number. I can't see any separate > sound-chip on the board, there are only two small chips, a VRD866* > and a 40528T. The names may be a bit different, they are really hard to > read. But, reading all docs in bttv source tree, I think, these chips > aren't related to sound. > > When I configure bttv with card=24 it writes to syslog, that it needs > module tvaudio, which is loaded and says, that it supports chipsets > tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 > (PV951). > > Here is my current modules.conf: > > options i2c verbose=1 scan=1 > options tuner debug=1 type=5 > options bttv radio=0 card=24 bttv_debug=1 > yep. I have had the same problem. When you make ./configure for xawtv try "./configure --help first". There is a (I think) --deselect-select=OSS option. Setting this solved my problem. Anders Gnistrup good luck ;-) Anders Gnistrup