Hello,
I'm very sorry to bother this list again with my problems but this is an
unusual thing.
My card just works perfectly but sometimes (at least once a day) when I
change channels the screen suddenly turns white with these stripes
actively running trough it, like on this screenshot:
http://www.techisg.org/~don/tvshot.jpg
When I try to change a channel then, nothing happeneds and the image
just stays the same, only the channel name in the xawtv tilebar changes.
In order to restore normal operation I need to shutdown the computer and
cold boot it again after a minute. Just reloading the modules has no
effect, the module doens't complain about anything and just loads like
it's supposed to, but the problem remains.
The problem can me easely reproduced by starting the 'radio' program,
shutting it down and then starting the 'xawtv' program, sometimes these
steps have to be repeated once or twice. Other video sources on the card
still work the way they're supposed to, like s-video.
I have tried to manually set the card id to 52 (Pinnacle PCTV Studio
Pro) when loading the bttv modules, but the problem will still occur.
Can this be a tuner problem?
I just bought the card recently, new from the store. But could it be
that my card is broken?
I don't use windows, so I can't try if it has the same problem there.
Is there a way to reset the card while running? Because maybe that will
work..
BTTV syslog messages:
--------------------------------
Jun 15 19:46:11 Don kernel: i2c-core.o: i2c core module
Jun 15 19:46:11 Don kernel: i2c-algo-bit.o: i2c bit algorithm module
Jun 15 19:46:11 Don kernel: bttv: driver version 0.7.68 loaded
Jun 15 19:46:11 Don kernel: bttv: using 2 buffers with 2080k (4160k
total) for capture
Jun 15 19:46:11 Don kernel: bttv: Bt8xx card found (0).
Jun 15 19:46:11 Don kernel: bttv0: Bt878 (rev 17) at 00:0c.0, irq: 9,
latency: 32, memory: 0xd8000000
Jun 15 19:46:11 Don kernel: bttv0: subsystem: bd11:1200 => Pinnacle
PCTV => card=39
Jun 15 19:46:11 Don kernel: bttv0: model: BT878(Pinnacle PCTV Studio/Ra)
[autodetected]
Jun 15 19:46:11 Don kernel: i2c-core.o: adapter bt848 #0 registered as
adapter 0.
Jun 15 19:46:11 Don kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
Jun 15 19:46:11 Don kernel: bttv0: miro: id=16 tuner=1 radio=fmtuner
stereo=yes
Jun 15 19:46:11 Don kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
Jun 15 19:46:11 Don kernel: i2c-core.o: driver i2c msp3400 driver
registered.
Jun 15 19:46:11 Don kernel: msp34xx: init: chip=MSP3451G-A2, has NICAM
support
Jun 15 19:46:11 Don kernel: msp3410: daemon started
Jun 15 19:46:11 Don kernel: bttv0: i2c attach [MSP3451G-A2]
Jun 15 19:46:11 Don kernel: i2c-core.o: client [MSP3451G-A2] registered
to adapter [bt848 #0](pos. 0).
Jun 15 19:46:11 Don kernel: bttv0: i2c: checking for TDA9875 @ 0xb0...
not found
Jun 15 19:46:11 Don kernel: bttv0: i2c: checking for TDA7432 @ 0x8a...
not found
Jun 15 19:46:11 Don kernel: tvaudio: TV audio decoder + audio/video mux
driver
Jun 15 19:46:11 Don kernel: tvaudio: known chips:
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
Jun 15 19:46:11 Don kernel: i2c-core.o: driver generic i2c audio driver
registered.
Jun 15 19:46:11 Don kernel: i2c-core.o: driver i2c TV tuner driver
registered.
Jun 15 19:46:11 Don kernel: tuner: chip found @ 0xc2
Jun 15 19:46:11 Don kernel: bttv0: i2c attach [Philips PAL_I]
Jun 15 19:46:11 Don kernel: i2c-core.o: client [Philips PAL_I]
registered to adapter [bt848 #0](pos. 1).
Jun 15 19:46:26 Don kernel: bttv0: PLL: 28636363 => 35468950 ... ok
--------------------------------
I hope someone will be able to help me out..
Sincerely,
Don van der Haghen
Don@xxxxxxxxxxx