Hello, I have a Guillemot Maxi TV Video PCI2 for two years. I live in France so programs are normally broadcasted in the SECAM norm but the parisian cable also broadcast some channels in PAL (Eurosport, CNN, RAI...). The problem is that I can't see these channels in PAL. In SECAM they are with poor colors but when I switched xawtv to PAL norm the channel is unseable and the sound is stopping. I tried to do the same under Windows and the result is good : I can watch PAL channel switching the norm to PAL. I also tried all the card for bttv.o and a lot of the tuner for tuner.o I use the bttv driver included in the 2.4.4 kernel. Could you help me to watch all my channels on my linux side ? Thanks Antoine Sirinelli -> here is my klog : Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.57 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Bt8xx card found (0). PCI: Found IRQ 10 for device 00:09.0 PCI: The same IRQ used for device 00:09.1 bttv0: Bt878 (rev 2) at 00:09.0, irq: 10, latency: 64, memory: 0xe7000000 bttv0: subsystem: 1851:1850 => Chronos Video Shuttle II => card=35 bttv0: model: BT878(MAXI TV Video PCI2) [insmod option] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x61 bttv0: i2c attach [Philips SECAM] i2c-core.o: client [Philips SECAM] registered to adapter [bt848 #0](pos. 0). -> and my /etc/modules.conf alias char-major-81 bttv options tuner type=3 options bttv pll=1 card=27 -- Le superflu, chose tres necessaire. -- Voltaire, Satires