Hi. Is there another way. I don't wanna install windofs on my mashine. mfg ED. Am Donnerstag, 3. Mai 2001 12:11 schrieben Sie: > In video4linux Edgar Hucek wrote: > >Does anyone get the audio working for then > >WinTv PVR. If yes, pleas post me what i must do. > > I am having the same problem, but noticed accidentally a simple workaround: > by booting to a well known GameOS, bttv finds MSP34xx just fine. > > >PS: we have joy we have fun we use linux on a sun. > > This might mean that this workaround is not available to you :( > > Here are dmesg snippets of good and bad behauviour for anyone interested. > > Linux video capture interface: v1.00 > i2c-core.o: i2c core module > i2c-algo-bit.o: i2c bit algorithm module > bttv: driver version 0.7.64 loaded > bttv: using 2 buffers with 2080k (4160k total) for capture > bttv: Bt8xx card found (0). > PCI: Found IRQ 9 for device 00:0d.0 > PCI: The same IRQ used for device 00:04.2 > PCI: The same IRQ used for device 00:04.3 > PCI: The same IRQ used for device 00:0d.1 > bttv0: Bt878 (rev 17) at 00:0d.0, irq: 9, latency: 32, memory: 0xd7000000 > bttv0: subsystem: 0070:4500 => Hauppauge WinTV/PVR => card=10 > bttv0: model: BT878(Hauppauge new (bt878)) [autodetected] > bttv0: Hauppauge msp34xx: reset line init > i2c-core.o: adapter bt848 #0 registered as adapter 0. > bttv0: Hauppauge eeprom: model=45234, tuner=Philips FM1216 (5), radio=yes > bttv0: i2c: checking for MSP34xx @ 0x80... found > i2c-core.o: driver i2c msp3400 driver registered. > msp34xx: init: chip=MSP3415D-B3, has NICAM support > msp3410: daemon started > bttv0: i2c attach [MSP3415D-B3] > i2c-core.o: client [MSP3415D-B3] registered to adapter [bt848 #0](pos. 0). > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > tvaudio: TV audio decoder + audio/video mux driver > tvaudio: known chips: > tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) > i2c-core.o: driver generic i2c audio driver registered. > i2c-core.o: driver i2c TV tuner driver registered. > tuner: chip found @ 0x61 > bttv0: i2c attach [Philips PAL] > i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 1). > bttv0: PLL: 28636363 => 35468950 ... ok > usb.c: USB disconnect on device 3 > > Linux video capture interface: v1.00 > bttv: driver version 0.7.64 loaded > bttv: using 2 buffers with 2080k (4160k total) for capture > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 17) at 00:0d.0, irq: 9, latency: 32, memory: 0xd7000000 > bttv0: subsystem: 0070:4500 => Hauppauge WinTV/PVR => card=10 > bttv0: model: BT878(Hauppauge new (bt878)) [autodetected] > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > tvaudio: TV audio decoder + audio/video mux driver > tvaudio: known chips: > tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
