|
my dmesg: i2c: initialized Linux I2O PCI support (c) 1999 Red Hat Software. i2c-core.o: i2c core module i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v0.01 ALPHA bttv: driver version 0.7.63 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 2) at 00:0a.0, irq: 5, latency: 32, memory: 0xe3000000 bttv0: subsystem: 144f:3002 => Askey Magic TView => card=24 bttv0: model: BT878(Askey/Typhoon/Anubis Ma) [insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x60 bttv0: i2c attach [(unset)] i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 0). i2c-core.o: driver tv card mixer driver registered. tvmixer: adapter bt848 #0 tvmixer: debug: (unset) tvmixer: (unset): has no volume control i2c-algo-pcf.o: i2c pcf8584 algorithm module i2c: driver registered: tda8425 i2c: driver registered: tda9855 i2c-core.o: driver i2c tda9875 driver registered. i2c-core.o: driver i2c tda7432 driver registered. i2c: driver registered: tea6300 bttv0: PLL: 28636363 => 35468950 ... ok /etc/modules: #auto #usbcore 3c59x.o #usb-uhci.o sound #videodev #i2o_pci i2c i2o_core debug=1 #i2o_block #i2o_config i2c-algo-bit debug=1 bttv radio=1 card=24 tuner debug=1 type=5 tvaudio debug=1 tvmixer debug=1 devnr=1 tda8425 debug=1 tda9855 debug=1 tda9875 debug=1 tda7432 debug=1 tea6300 debug=1