Hi everyone, I'm having a little trouble getting mp1e to work with my old 848-based Hauppauge. Having added extra debugging messages, it is seeming to get stuck after the first frame, waiting for sync on the second. CMCAPTUREs for the first and second frame work. very first CSYNC for frame 0 succeeds. (The 0+ below shows CSYNC called, and the + is printed when it returns) mp1e throws up a 0:00.00 (0.0 MB) message. cap_frame_done is called for frame 0, calling CMCAPTURE for frame 0 cap_wait_frame is called for frame 1 The CSYNC for frame 1 never returns (no +). CCO: 0 CCO: 1 Video compression thread: Capture stream on 0+Compressing frame #0 CFD: 0 0 0:00.00 (0.0 MB) 1 Having fudged io.c to make the audio-caps assert an 'if(), mp1e does work nicely with my other v4l device - a webcam (usb). 0+Compressing frame #0 CFD: 0 0 0:00.00 (0.0 MB) 1+Compressing frame #1 CFD: 1 1 0:00.01 (0.0 MB) 0+Compressing frame #2 CFD: 0 0 0:00.02 (0.0 MB) 1+Compressing frame #3 CFD: 1 1 Questions: Does anyone have a similar setup working with bttv / v4l1 / mp1e ? Is there a more appropriate place to ask on mp1e issues - the bttv card works fine with xawtv, so I don't think there's an issue there. (It's just a little odd mp1e works with my cam, and not with the bt848 board) Trying with thev4l2 driver is next on my list of things to try. The base system's RH7, uptodate on updates. Thanks for any information, Mark -- +-------------------------------------------------------------------------+ Mark Cooke The views expressed above are mine and are not Systems Programmer necessarily representative of university policy University Of Birmingham URL: http://www.sr.bham.ac.uk/~mpc/ +-------------------------------------------------------------------------+