Ryan,
I had the exact same problem a few months ago. I thought I had posted the
resolution to this list but it was actually the linux-abit list.
The important bits of information that solved the problem for me were:
1) the bt878 will not share an IRQ
2) PCI slots 4 and 5 cannot *both* have a bus-mastering card in them
(rule of thumb is to leave one of them empty)
here is an excerpt from my linux-abit post (note that I am running
dual-headed with both an AGP and PCI video card):
I found a combination of cards and slots that works!
1. FA310TX NIC
2. BT878 TV card
3. PCI TNT
4. empty
5. es1371 sound
CPU0 CPU1
0: 848134 808283 IO-APIC-edge timer
1: 4693 4769 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 0 1 IO-APIC-edge rtc
9: 269 277 IO-APIC-level bttv
11: 191916 190465 IO-APIC-level es1371, eth0
12: 105221 104249 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 15138 16246 IO-APIC-edge ide0
15: 12 2 IO-APIC-edge ide1
NMI: 0
ERR: 0
the PCI TNT card is on IRQ 10 but does not show up above
Dwayne
> Hello All-
>
> I think I have narrowed my WinTV Go problem down to a shared IRQ issue...
> based on info in the archives.
>
> It looks like my ethernet card, USB controlled, and WinTV Go card are all on
> IRQ 10.
>
> Bus 0, device 7, function 2:
> USB Controller: Intel 82371AB PIIX4 USB (rev 1).
> Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable.
> Latency=32.
> I/O at 0xd000 [0xd001].
> Bus 0, device 9, function 0:
> Multimedia video controller: Brooktree Bt878 2nd Contr. (?) (rev 17).
> Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable.
> Latency=32. Min Gnt=16.Max Lat=40.
> Prefetchable 32 bit memory at 0xec001000 [0xec001008].
> Bus 0, device 9, function 1:
> Multimedia controller: Brooktree Bt878 (rev 17).
> Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable.
> Latency=32. Min Gnt=4.Max Lat=255.
> Prefetchable 32 bit memory at 0xec002000 [0xec002008].
> Bus 0, device 17, function 0:
> Ethernet controller: LiteOn Unknown device (rev 37).
> Vendor id=11ad. Device id=c115.
> Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable.
> Latency=32. Min Gnt=8.Max Lat=56.
> I/O at 0xd400 [0xd401].
> Non-prefetchable 32 bit memory at 0xec000000 [0xec000000].
>
>
> How do I change the IRQ? I have to move it to another slot right? And
> change something in the BIOS? Anyone familar with how to do this on an Abit
> BP6?
>
> Thanks in advance...
> Ryan
>
>
>
> _______________________________________________
> Video4linux-list mailing list
> Video4linux-list@xxxxxxxxxx
> https://listman.redhat.com/mailman/listinfo/video4linux-list
>
