Hi, I just got an old ATI TV Wonder VE card from a friend. I installed it in my Redhat 9 and everything seemed work and image looked okay, but then I found out there is no subtitle(CC) when I ran zapping, and when I close zapping the console show ===== I/O error #5 in decoding thread: V4L/V4L2 VBI interface: Failed to read from the device Aborting. ===== Can someone give me a clue if this was the hardware failure or my setup was wrong. my setup is kernel redhat 9 2.4.20-24_30.rh9.at bttv 0.9.11 zvbi 0.2.4 zapping 0.6.7 part of modules.conf # i2c alias char-major-89 i2c-dev options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=1 # bttv alias char-major-81 videodev alias char-major-81-0 bttv alias char-major-81-224 bttv options bttv card=64 options tuner debug=1 type=2 dmesg showed ======================== bttv: driver version 0.9.11 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge is Silicon Integrated Systems [SiS] 746 Host bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:08.0, irq: 10, latency: 32, mmio: 0xee003000 bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003 bttv0: using: BT878(ATI TV-Wonder VE) [card=64,insmod option] bttv0: using tuner=19 bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner(bttv): type forced to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) [insmod] bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: PLL can sleep, using XTAL (28636363). bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: skipped frame. no signal? high irq latency? bttv0: timeout: risc=09e0f07c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). bttv0: unloading ===================================== Thanks!! CK at Home __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/
