It was my second try to use IR and evdev on such card.
Result is same as first.
If somebody use that duo - please contact.
Here are the messages:
pty: 256 Unix98 ptys configured
lirc_dev: IR Remote Control driver registered, at major 61
Serial: 8250/16550 driver $Revision: 1.90 $ 52 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTLA-307045, ATA DISK drive
hdb: IC35L040AVER07-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: E-IDE CD-ROM CR-856E, ATAPI CD/DVD-ROM drive
hdd: CD-W58E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 90069840 sectors (46115 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
hdb: max request size: 128KiB
hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
rivafb: nVidia device/chipset 10DE0028
rivafb: RIVA MTRR set to ON
rivafb: PCI nVidia NV4 framebuffer ver 0.9.5b (nVidiaRIVA-TNT2, 32MB @ 0xE2000000)
SGI XFS for Linux with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
VFS: Mounted root (xfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 176k freed
Real Time Clock Driver v1.12
Adding 192744k swap on /dev/hdb1. Priority:-1 extents:1
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
i2c /dev entries driver
i2c-core.o: driver dev_driver registered.
i2c-core.o: driver w83781d registered.
registering 0-0290
XFS mounting filesystem hda7
Ending clean XFS mount for filesystem: hda7
XFS mounting filesystem hdb5
Ending clean XFS mount for filesystem: hdb5
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xd800, IRQ 10, 00:C0:DF:F2:BC:4B.
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0319860(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Linux video capture interface: v1.00
i2c-core.o: driver i2c TV tuner driver registered.
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:00:0f.0, irq: 5, latency: 32, mmio: 0xe6000000
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0001
bttv0: using: AVerMedia TVPhone 98 [card=41,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=000477c3 [init]
i2c-algo-bit.o: Adapter: bt878 #0 [sw] scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
tuner: chip found @ 0xc2
registering 1-0061
tuner: type forced to -1 (<NULL>) [insmod]
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: Avermedia eeprom[0x0a21]: tuner=5 radio:yes remote control:yes
bttv0: using tuner=5
tuner: type already set (5)
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
ir-kbd-gpio: bttv IR (card=41) detected at pci-0000:00:0f.0/ir0
-----------
$ sudo lsmod | grep -v snd
Module Size Used by
ir_kbd_gpio 6020 0
ir_common 4740 1 ir_kbd_gpio
tvaudio 22284 0
bttv 146284 1 ir_kbd_gpio
tuner 17676 0
video_buf 22660 1 bttv
i2c_algo_bit 10248 1 bttv
v4l2_common 6400 1 bttv
btcx_risc 5000 1 bttv
videodev 10240 1 bttv
md5 4352 1
ipv6 245440 12
button 6296 0
ne2k_pci 9312 0
8390 10624 1 ne2k_pci
crc32 4608 1 8390
ext2 71272 1
mbcache 8580 1 ext2
w83781d 35456 0
i2c_sensor 3200 1 w83781d
i2c_isa 2176 0
i2c_dev 10880 0
i2c_core 25480 8 tvaudio,bttv,tuner,i2c_algo_bit,w83781d,i2c_sensor,i2c_isa,i2c_dev
usbcore 109020 1
rtc 12344 0
psmouse 18056 0
evdev 10240 0
xfs 577336 3
rivafb 48708 1
vgastate 10496 1 rivafb
----------
$ ./list
/dev/input/event0
bustype : BUS_I8042
vendor : 0x1
product : 0x2
version : 43778
name : "AT Translated Set 2 keyboard"
phys : "isa0060/serio0/input0"
bits ev : EV_SYN EV_KEY EV_LED EV_REP
/dev/input/event1
bustype : BUS_I8042
vendor : 0x2
product : 0x5
version : 0
name : "ImPS/2 Generic Wheel Mouse"
phys : "isa0060/serio1/input0"
bits ev : EV_SYN EV_KEY EV_REL
/dev/input/event2
bustype : BUS_PCI
vendor : 0x1461
product : 0x1
version : 1
name : "bttv IR (card=41)"
phys : "pci-0000:00:0f.0/ir0"
bits ev : EV_SYN EV_KEY EV_REP
open /dev/input/event3: No such device
----------
$ ./events 2
/dev/input/event2
bustype : BUS_PCI
vendor : 0x1461
product : 0x1
version : 1
name : "bttv IR (card=41)"
phys : "pci-0000:00:0f.0/ir0"
bits ev : EV_SYN EV_KEY EV_REP
waiting for events
timeout, quitting
---------
$ cat /dev/input/event2
null
---------
$ uname -a
Linux hag 2.6.0 #1 Thu Dec 11 20:24:09 CET 2003 i686 AMD_Athlon(tm)_XP_1600+ unknown PLD Linux
---------
evdev included in initrd (PREMODS initrd).
???
--
Wiesław Kierbedź
gg 2128870; wieslaw_kierbedz@xxxxxxxxxx
www.v4l.prv.pl (video4linux - podstawy)
