konqueror + tv linux
De:
Paco Chaves <pacochaves@xxxxxxxxxx> (Kanchata.org)
Para:
newbie-es@xxxxxxxxxxxxxxxxxx
Fecha:
Wed Dec 3 22:58:29 2003
hola a todos, vereis entre otros tengo un problema con
otro : xawtv, estoy muy interesado en lograr hacer funcionar tv en linux y
aunque antes lo habia logrado con una anterior instalaccion, se perdio por
fallo en H.D., y ahora con Mandrake 9.2 no consigo que P. Ej. Xawtv se inicie
correctamente, > como sigue, esto es con un Nucleo 2.6.0-test8 sobre mandrake
9.2 :
root@localhost root]# xawtv
This is xawtv-3.88, running on Linux/i686 (2.6.0-test8mi1)
can't open /dev/v4l/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/v4l/video0: No such file or directory
v4l2: open /dev/v4l/video0: No such file or directory
v4l: open /dev/v4l/video0: No such file or directory
no video grabber device available
[root@localhost root]# xawtv -hwscan
This is xawtv-3.88, running on Linux/i686 (2.6.0-test8mi1)
looking for available devices
[root@localhost root]# modprobe bttv
[root@localhost root]# lsmod
Module Size Used by
tuner 16012 0
tvaudio 22796 0
bttv 139756 0
video_buf 22788 1 bttv
i2c_algo_bit 10632 1 bttv
btcx_risc 5128 1 bttv
i2c_core 25864 4 tuner,tvaudio,bttv,i2c_algo_bit
apm 19040 2
snd_seq_midi 10144 0
snd_opl3_synth 17284 0
snd_seq_instr 10112 1 snd_opl3_synth
snd_seq_midi_emul 8704 1 snd_opl3_synth
snd_ainstr_fm 3072 1 snd_opl3_synth
snd_seq_oss 38016 0
snd_seq_midi_event 8192 2 snd_seq_midi,snd_seq_oss
snd_seq 63760 8
snd_seq_midi,snd_opl3_synth,snd_seq_instr,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 64804 1
snd_mixer_oss 22144 1 snd_pcm_oss
snd_cmipci 36152 1
snd_pcm 114212 2 snd_pcm_oss,snd_cmipci
snd_page_alloc 12932 1 snd_pcm
snd_opl3_lib 11904 2 snd_opl3_synth,snd_cmipci
snd_timer 28164 3 snd_seq,snd_pcm,snd_opl3_lib
snd_hwdep 10400 1 snd_opl3_lib
snd_mpu401_uart 8448 1 snd_cmipci
snd_rawmidi 27168 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 8712 6
snd_seq_midi,snd_opl3_synth,snd_seq_oss,snd_seq,snd_opl3_lib,snd_rawmidi
snd 59620 17
snd_seq_midi,snd_opl3_synth,snd_seq_instr,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
af_packet 22408 0
nls_iso8859_15 4736 2
ext3 116872 1
jbd 72612 1 ext3
ide_scsi 15616 1
rtc 13112 0
[root@localhost root]# xawtv
This is xawtv-3.88, running on Linux/i686 (2.6.0-test8mi1)
Xlib: extension "NV-GLX" missing on display ":0.0".
NV: could not open control device /dev/nvidiactl (No such file or directory)
Segmentation fault (core dumped)
[root@localhost root]#
//////// es con una Nvidia TNT2 32Mb PCI : drivers /src.rpm version 1.0-3123
XF86Config-4 :
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "RIVA TNT2"
Driver "nv"
Screen 0
BusID "PCI:0:10:0"
Option "DPMS"
alguibn puede dar una mano, gracias.......
pacochaves
---Publicidad--------------------------------------------------------
Únete a los miles de sin pareja en Meetic... ¡te vas a enamorar!
http://www.iespana.es/_reloc/email.meetic
