Hi I decided to try out 2.6.0-test10 (from 2.4.18). My Genius Video Wonder Pro II V2 stopped working, and I'm having trouble figuring out why. I tried fiddling around with the card and tuner options, with no luck. The card is an LR50 REV T, using the Conexant Bt878, and a Philips PAL tuner which I can't identify exactly (serial number 3139 147 13901L). The exact symptoms: the driver loads, /dev/video0 can be opened, but the device has no inputs. I'm not opposed to a little bit of kernel hacking, but I'd appreciate it if anybody could save me some time. Output from dmesg follows for both kernels: 2.4.18 --------------------------------------------------- i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v1.00 bttv: driver version 0.7.91 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: Found IRQ 10 for device 00:0b.0 PCI: Sharing IRQ 10 with 00:0b.1 bttv0: Bt878 (rev 2) at 00:0b.0, irq: 10, latency: 64, memory: 0xee001000 bttv0: detected: Flyvideo 98FM (LR50)/ Typhoon TView TV/FM Tuner [card=36], PCI subsystem ID is 1852:1852 bttv0: using: BT878(FlyVideo '98/FM) [card=56,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: flyvideo_gpio: unknown tuner type. bttv0: Flyvideo Radio=yes RemoteControl=yes Tuner=-1 gpio=0xe8ff00 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv0: i2c attach [client=Philips PAL,ok] i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 0). bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 2.6.0-test10 ------------------------------------------- bttv: driver version 0.9.12 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: Found IRQ 10 for device 0000:00:0b.0 PCI: Sharing IRQ 10 with 0000:00:0b.1 bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 10, latency: 64, mmio: 0xee001000 bttv0: detected: FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner [card=36], PCI subsystem ID is 1852:1852 bttv0: using: Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 [card=8,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: FlyVideo_gpio: unknown tuner type. bttv0: FlyVideo Radio=yes RemoteControl=yes Tuner=-1 gpio=0xe8ff00 bttv0: FlyVideo LR90=no tda9821/tda9820=no capture_only=no bttv0: using tuner=1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok
