Hi, I need some help, I have a Pinnacle PCTV Pro, that I bought two months ago, but I can't see TV. When I start xawtv, I have only a Blue screen and some noise. I have a redhat 8.0 with the last kernel 2.4.20 and the last bttv driver 0.7.106, I live in Portugal and in xawtv I use PAL west-europe in configuration. This is my configuration: # cat /etc/modules.conf # i2c alias char-major-89 i2c-dev options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=1 # bttv alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=52 radio=1 pll=1 tuner=33 options msp3400 simple=1 #dmesg i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.106 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Silicon Integrated Systems [SiS] 735 Host bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0d.0 PCI: Sharing IRQ 11 with 00:02.7 PCI: Sharing IRQ 11 with 00:0d.1 bttv0: Bt878 (rev 17) at 00:0d.0, irq: 11, latency: 64, mmio: 0xcddfe000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio Pr) [card=52,insmod option] i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c-algo-bit.o:1 scl: 1 sda: 0 i2c-algo-bit.o:2 scl: 1 sda: 1 i2c-algo-bit.o:3 scl: 0 sda: 1 i2c-algo-bit.o:4 scl: 1 sda: 1 i2c-algo-bit.o: bt848 #0 passed test. i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: init: chip=MSP3410G-B11 +nicam +simple +radio msp3410: daemon started i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 tuner: type set to 33 (MT2032 universal) MT2032: Companycode=4d54 Part=04 Revision=04 i2c-core.o: client [MT2032 universal] registered to adapter [bt848 #0](pos. 1). MT2032: Companycode=4d54 Part=04 Revision=04 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 mt2032 spurcheck triggered: 2 #lsmod tuner 12480 1 (autoclean) tvaudio 16604 0 (autoclean) (unused) msp3400 19788 1 (autoclean) bttv 82784 1 (autoclean) i2c-algo-bit 8776 1 (autoclean) [bttv] i2c-core 19044 0 (autoclean) [tuner tvaudio msp3400 bttv i2c-algo-bit] videodev 8352 4 (autoclean) [bttv] What's wrong ? Thank's ND -- Nuno Dias <ndias@xxxxxxxxx> OAL
