Hi Shaun, The EEPROM is a recent phenomenon. My FV2K (PAL) doesn't have any EEPROMs. I guess the definitions would work for those cards that do have the EEPROMs, and overrides using insmod options for others. T.C. ---- Wan Tat Chee (Lecturer) School of Computer Science, Univ. Science Malaysia, 11800 Minden, Penang, Malaysia. Ofc Ph: +604 653-3888 x 3617 Internet: tcwan@xxxxxxxxx Web: http://nrg.cs.usm.my/~tcwan GPG Key : http://nrg.cs.usm.my/~tcwan/tcw_gpg.asc F'print : FB0F CED7 85A5 ECF9 DEF0 50E8 A550 A0D2 8638 B1EB On Mon, 23 Dec 2002, Shaun Jackman wrote: > The following patch adds PCI vendor/device information for the > FlyVIDEO2000. These boards are hard-wired for NTSC/PAL/SECAM. I hope > there is some way to tell them apart. Right now my NTSC board is > detected as PAL (the default). Perhaps I can compare the > revision or subdevice number with someone that owns a PAL version to > see if they differ. The revision number of my board (at address 0x08 > in the PCI config) is 0x01. Subvendor is 0x5168. Subdevice is 0x0138. > > Cheers, > Shaun
