Hello Charlie, Thanks for the speedy reply, I have followed the instructions you provided but..... On Tue, 3 Dec 2002, Charlie Liu wrote: > 1) 311 board jumper setting: > Here are four different Jumper setting combinations you could try: > J3: ||, with J8 closed (|) -- slot 0, and INT A > J3: |:, with J7 closed (|) -- slot 1, and INT B > J3: :|, with J6 closed (|) -- slot 2, and INT C > J3: ::, with J5 closed (|) -- slot 3, and INT D I have tried all these jumper combinations (and more) (The framegrabber is the only other board on my PC/104 system) but I continue to get "init_module: No such device" error > 2) config setting: > Also, please pay attention to make config setting change in > /etc/modules.conf to comply with: > alias char-maj...........etc My /etc/modules.conf does comply exactly with your recomendations > 3) Once everything right, you should see the following info, when you run > the demo apps. Note that you need turn on the DISPLAY_INFO swith in the > sample programs. > > vd.name: "BT878(Sensoray 31..........etc I have not received the demo apps on purchase of the framegrabber (files Sx11_ppm.c & Sx11_pgm.c for image capturing) How do I go about geting these? Can you provide them? > 4) Sure, then you will get the images saved into files right away. I hope so! Regards John
