The subsystem info is vendor specific. The info is read from an EEPROM that is connected to the I2C pins (See section 3.5 of the 878 datasheet). If the EEPROM is not present then the 878 cannot get the information. I hope that helps. Mike Robert Stanford wrote: > Im trying to add support for a new card I got, manufacturer is a comapny > called Items. Cant find any info on them from the net. > > Chip is a Conexant Fusion 878A 258T8-13 > > Has an LG TPI8PSB11P 105A0106 tuner, i notice the TPI8PSB11 : PAL > B/G (TPI8PSB01 w/FM) (P,170/450) is mentioned in the Tuners file > however what value do I feed the module parameter for this? > > Unfortunately I cant get Subsystem: info from lspci, it simply isnt > there. Is there another way to get it or doesnt the 878A have this > support? > > Card has, fm, tv, lineout, svhs, line in, comp and r/f plus in the back. > > --- > lspci -vv > > 00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (4000ns min, 10000ns max) > Interrupt: pin A routed to IRQ 12 > Region 0: Memory at df001000 (32-bit, prefetchable) [size=4K] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (1000ns min, 63750ns max) > Interrupt: pin A routed to IRQ 12 > Region 0: Memory at df002000 (32-bit, prefetchable) [size=4K] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > --- > > scanpci -vv > > pci bus 0x0 cardnum 0x0b function 0x0000: vendor 0x109e device 0x036e > BrookTree Device unknown > STATUS 0x0290 COMMAND 0x0006 > CLASS 0x04 0x00 0x00 REVISION 0x11 > BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00 > BASE0 0xdf001008 addr 0xdf001000 MEM PREFETCHABLE > MAX_LAT 0x28 MIN_GNT 0x10 INT_PIN 0x01 INT_LINE 0x0c > > pci bus 0x0 cardnum 0x0b function 0x0001: vendor 0x109e device 0x0878 > BrookTree Device unknown > STATUS 0x0290 COMMAND 0x0006 > CLASS 0x04 0x80 0x00 REVISION 0x11 > BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00 > BASE0 0xdf002008 addr 0xdf002000 MEM PREFETCHABLE > MAX_LAT 0xff MIN_GNT 0x04 INT_PIN 0x01 INT_LINE 0x0c > > -- > ¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤ > Robert Stanford > º¤º°`°º¤ø,¸¸,ø¤º°`°º¤º > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/video4linux-list
