Re: Buz help

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi,

Op do 22-08-2002, om 17:55 schreef Lance F. Squire:
> As expected when I run XawTV it complains about not finding a /dev for it.

Does the file /dev/video exist? (ls /dev/video).

If it says "no such device", it might not have found the card. See your
'dmesg' output. Probably, the zr36067 module was loaded before the
saa7111/saa7185 module. To correct this, remove the zr36067 module
(/sbin/rmmod zr36067) and load the modules in the right order
(/sbin/insmod saa7111, /sbin/insmod saa7185 and /sbin/insmod zr36067).
If xawtv now works, you've found your solution. Adding "pre-install
zr36067 ( /sbin/insmod saa7110; /sbin/insmod saa7185 )" and "post-remove
( /sbin/rmmod saa7110; /sbin/rmmod saa7185 )" to your /etc/modules.conf
should correct the problem on subsequent boots.

> The two sites I found on the web pointed to this and another buz mailing
> list. The links to the other list don't work. So here I am.

It probably points to the old mailinglist. It has moved to
mjpeg-users@xxxxxxxxxxxxx

Ronald

-- 
-   .-.
-   /V\    | Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
-  // \\   | Running: Linux-2.4.18-3 and OpenBSD 3.0
- /(   )\  | http://ronald.bitfreak.net/
-  ^^-^^





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux