Hi, I'm having a problem with my DC10+ capture card under Valhalla. Before movong to Redhat, I used Debian and the card was working fine. Here is what I modprobe: modprobe adv7175 modprobe saa7110 modprobe zr36067 default_norm=0 lock_norm=0 pass_through=0 Here is what I have in /var/log/messages: Aug 15 15:58:33 linuxsta kernel: Zoran ZR36060 + ZR36057/67 MJPEG board driver version 0.7 Aug 15 15:58:33 linuxsta kernel: PCI: Found IRQ 11 for device 02:02.0 Aug 15 15:58:33 linuxsta kernel: MJPEG[0]: Zoran ZR36067 (rev 2) irq: 11, memory: 0xdf001000 Aug 15 15:58:33 linuxsta kernel: MJPEG[0]: subsystem vendor=0x1031 id=0x7efe Aug 15 15:58:33 linuxsta kernel: MJPEG[0]: Initializing i2c bus... Aug 15 15:58:33 linuxsta kernel: adv7176_attach: adv7176 rev. 1 at 0x56 Aug 15 15:58:33 linuxsta kernel: DC10plus[0] card detected Aug 15 15:58:33 linuxsta kernel: DC10plus[0]: Zoran ZR36060 (rev 1) Aug 15 15:58:33 linuxsta kernel: MJPEG: 1 card(s) found Aug 15 15:58:33 linuxsta kernel: MJPEG: using 2 V4L buffers of size 128 KB Aug 15 15:58:33 linuxsta kernel: DC10plus[0]: Initializing card[0], zr=e5bd0800 Aug 15 15:58:34 linuxsta kernel: DC10plus[0]: Testing interrupts... Aug 15 15:58:34 linuxsta kernel: DC10plus[0]: interrupts received: GIRQ1:60 queue_state=0/0/0/0 Aug 15 15:58:34 linuxsta kernel: DC10plus[0]: procfs entry /proc/zoran0 allocated. data=e5bd0800 and this is the error happening with xawtv: $ xawtv -c /dev/video1 This is xawtv-3.73, running on Linux/i686 (2.4.18-5) v4l-conf had some trouble, trying to continue anyway ioctl: VIDIOCSCHAN(0,Composite,flags=0x0,type=2,norm=2): Invalid argument ioctl: VIDIOCSCHAN(0,Composite,flags=0x0,type=2,norm=3): Invalid argument v4l: timeout (got SIGALRM), hardware/driver problems? ioctl: VIDIOCSYNC(0): Interrupted system call ioctl: VIDIOCMCAPTURE(0,fmt=15,size=48x24): Invalid argument ioctl: VIDIOCMCAPTURE(0,fmt=3,size=48x24): Interrupted system call ioctl: VIDIOCMCAPTURE(0,fmt=4,size=48x24): Interrupted system call ioctl: VIDIOCMCAPTURE(0,fmt=5,size=48x24): Interrupted system call ioctl: VIDIOCMCAPTURE(0,fmt=1,size=48x24): Invalid argument ioctl: VIDIOCMCAPTURE(0,fmt=13,size=48x24): Invalid argument no way to get: 384x288 16 bit TrueColor (LE) Broken pipe ... and at last the error with v4l-conf: $ v4l-conf -c /dev/video1 v4l-conf: using X11 display :0.0 dga: version 2.0 mode: 1600x1200, depth=16, bpp=16, bpl=3584, base=0xd4000000 /dev/video1 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument /dev/video1 [v4l]: configuration done Anyone has any idea how I could fix this and make my card working ? Thanks in advance. -- Antoine Jacoutot Linux - Redhat 7.3 Valhalla ajacoutot@xxxxxxxxxxxxxxxxxx http://linuxfr.dyndns.org http://windowsfr.dyndns.org
