Hey all, I feel rather foolish with this, but can someone point me to my problem. I have an IBM Camera that loads properly, it seems. I just can't access it from the video software. The USB Bus sees the camera as: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=6400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.01 Cls=0a(data ) Sub=03 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0545 ProdID=8080 Rev= 3.01 S: Product=USB PC Camera C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=0a(data ) Sub=03 Prot=00 Driver=ibmcam E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms I: If#= 0 Alt= 1 #EPs= 1 Cls=0a(data ) Sub=03 Prot=00 Driver=ibmcam E: Ad=81(I) Atr=01(Isoc) MxPS=1022 Ivl= 1ms The ibmcam module loads and triggers on the proper camera, I believe. But the software vctrl and vcat say no device, or can't open. [root@ip21 videox]# ./vctrl sorry, no such device /dev/video [root@ip21 videox]# ./vcat Can't open /dev/video I have the following Device for the video listed: [root@ip21 videox]# ll /dev/video* lrwxrwxrwx 1 root root 11 Dec 10 14:25 /dev/video -> /dev/video0 crw------- 1 root root 81, 0 Aug 30 13:30 /dev/video0 crw------- 1 root root 81, 1 Aug 30 13:30 /dev/video1 crw------- 1 root root 81, 2 Aug 30 13:30 /dev/video2 crw------- 1 root root 81, 3 Aug 30 13:30 /dev/video3 What am I missing. I know it must be something simple with my config somewhere. Steve
