Andy, Did you compile in I2C support? It's needed by the bttv driver. Hope this helps, Erik. On Thu, 6 Dec 2001, Andrea M. Froncioni wrote: > > > > > I am unable to run xawtv using an ATI AIW Rage 128 Pro 32Mb. > > > I get the following: > > > > > > --------------------------------------------------------------------- > > > % xawtv > > > This is xawtv-3.54, running on Linux/i686 (2.4.7-10) > > > can't open /dev/video0: No such device > > > v4l2: open /dev/video0: No such device > > > v4l: open /dev/video0: No such device > > > no video grabber device available > > > > ********************************* > > > > > --------------------------------------------------------------------- > > > > > > I am running RH 7.2 (fresh install). My XF86Config-4 file looks like: > > > > This is not an error with you graphics output card. Xawtv simply cannot > > find your input tv tuner card. Did you `insmod bttv` ? > > Ok, I tried the following: > > %insmod bttv > Using /lib/modules/2.4.7-10/kernel/drivers/media/video/bttv.o > /lib/modules/2.4.7-10/kernel/drivers/media/video/bttv.o: unresolved symbol > i2c_master_send_R933abeec > /lib/modules/2.4.7-10/kernel/drivers/media/video/bttv.o: unresolved symbol > i2c_bit_add_bus_R8c3bc60e > /lib/modules/2.4.7-10/kernel/drivers/media/video/bttv.o: unresolved symbol > i2c_bit_del_bus_R92b18f49 > /lib/modules/2.4.7-10/kernel/drivers/media/video/bttv.o: unresolved symbol > video_register_device_R2fa47021 > /lib/modules/2.4.7-10/kernel/drivers/media/video/bttv.o: unresolved symbol > i2c_master_recv_R7f9cffd8 > /lib/modules/2.4.7-10/kernel/drivers/media/video/bttv.o: unresolved symbol > video_unregister_device_R6cc2fd57 > > > Still no luck. Any ideas? > > Thanks, > > Andy > > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list >
